lkml.org 
[lkml]   [2018]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/2] spi: bcm-qspi: Fix spi-nor chip select logic for BSPI
Date
spi-nor master controller driver needs to verify the chip select bit in the
cs register for any cs change during trasfers. Also CDRAM PCS field not used
in BSPI mode, set defualt to ~1 indicating active low for zeroth bit.
Also always enable/disable BSPI_MAST_N_BOOT_CTRL when using BSPI mode.


*** BLURB HERE ***

Kamal Dasu (2):
spi: bcm-qspi: Avoid setting MSPI_CDRAM_PCS for spi-nor master
spi: bcm-qspi: Always change BSPI_MAST_N_BOOT_CTRL state

drivers/spi/spi-bcm-qspi.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2018-04-25 20:29    [W:0.050 / U:2.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site