lkml.org 
[lkml]   [2018]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] ARM: dts: i.MX6: imx6dl-mamoj: Add usb host and device support
Date
From: Michael Trimarchi <michael@amarulasolutions.com>

Add USB host and device support for BTicino i.MX6DL Mamoj board.

Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/boot/dts/imx6dl-mamoj.dts | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
index 5034b086035f..a727e1471006 100644
--- a/arch/arm/boot/dts/imx6dl-mamoj.dts
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -134,6 +134,17 @@
vin-supply = <&reg_lcd_vgl>;
};

+ reg_usb_host: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usbhost-vbus";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbhost>;
+ regulator-min-microvolt = <50000000>;
+ regulator-max-microvolt = <50000000>;
+ gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_wl18xx_vmmc: regulator-wl18xx-vmcc {
compatible = "regulator-fixed";
regulator-name = "vwl1807";
@@ -297,6 +308,16 @@
status = "okay";
};

+&usbh1 {
+ vbus-supply = <&reg_usb_host>;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
@@ -428,6 +449,12 @@
>;
};

+ pinctrl_usbhost: usbhost {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069
--
2.14.3
\
 
 \ /
  Last update: 2018-04-25 19:41    [W:0.074 / U:1.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site