lkml.org 
[lkml]   [2018]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 13/13] arm64: dts: allwinner: a64: bananapi-m64: Enable HDMI output
Date
Enable HDMI output on Bananpi-m64 board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 2250dec9974c..50debe17e8fa 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -60,6 +60,17 @@
stdout-path = "serial0:115200n8";
};

+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";

@@ -86,6 +97,10 @@
};
};

+&de {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -99,6 +114,17 @@
status = "okay";
};

+&hdmi {
+ vcc-hdmi-dsi-supply = <&reg_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
--
2.14.3
\
 
 \ /
  Last update: 2018-04-24 15:36    [W:0.188 / U:1.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site