lkml.org 
[lkml]   [2018]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/1] cover-letter/lz4: Implement lz4 with dynamic offset length.
From
Date

 Hello,

>> (Added cover letter to avoid much text in patch description)
>>
>> LZ4 specification defines 2 byte offset length for 64 KB data.
>> But in case of ZRAM we compress data per page and in most of
>> architecture PAGE_SIZE is 4KB. So we can decide offset length based
>> on actual offset value. For this we can reserve 1 bit to decide offset
>> length (1 byte or 2 byte). 2 byte required only if ofsset is greater than 127,
>> else 1 byte is enough.
>
>So what happens if I compress the data on a system with no dyn
>offset and then send it over the network to a machine which has
>dyn offset? Or, say, I have a USB stick with a compression enabled
>FS, store files on a dyn offset enabled PC and then mount that USB
>stick on a machine with no dyn offset support. And vice versa.


lz4_dyn is not an extension of LZ4 so there is no backward compatibility.
Consider this as a different algorithm adapted from LZ4 for better compression ratio.

Thanks
Maninder Singh

\
 
 \ /
  Last update: 2018-04-02 08:08    [W:0.181 / U:3.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site