lkml.org 
[lkml]   [2018]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu
From
Date
Hi Viresh,

On 4/2/2018 3:00 PM, Viresh Kumar wrote:
> +Sricharan,
>
> On 30-03-18, 00:26, Ilia Lin wrote:
>> In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
>> that have KRYO processors, the CPU ferequencies subset and voltage value
>> of each OPP varies based on the silicon variant in use.
>> Qualcomm Technologies, Inc. Process Voltage Scaling Tables
>> defines the voltage and frequency value based on the msm-id in SMEM
>> and speedbin blown in the efuse combination.
>> The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
>> to provide the OPP framework with required information.
>> This is used to determine the voltage and frequency value for each OPP of
>> operating-points-v2 table when it is parsed by the OPP framework.
>>
>> This change adds documentation.
>>
>> Change-Id: I1953f652a48249fb516d175f0e965a9510cd4209
>> Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
>> ---
>> .../devicetree/bindings/cpufreq/kryo-cpufreq.txt | 693 +++++++++++++++++++++
>> 1 file changed, 693 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
>>
>> diff --git a/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
>
> This should really go in opp directory.
>
>> new file mode 100644
>> index 0000000..20cef9d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt
>> @@ -0,0 +1,693 @@
>> +Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
>> +===================================
>> +
>> +In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
>> +that have KRYO processors, the CPU ferequencies subset and voltage value
>> +of each OPP varies based on the silicon variant in use.
>> +Qualcomm Technologies, Inc. Process Voltage Scaling Tables
>> +defines the voltage and frequency value based on the msm-id in SMEM
>> +and speedbin blown in the efuse combination.
>> +The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
>> +to provide the OPP framework with required information (existing HW bitmap).
>> +This is used to determine the voltage and frequency value for each OPP of
>> +operating-points-v2 table when it is parsed by the OPP framework.
>> +
>> +Required properties:
>> +--------------------
>> +In 'cpus' nodes:
>> +- operating-points-v2: Phandle to the operating-points-v2 table to use.
>> +
>> +In 'operating-points-v2' table:
>> +- compatible: Should be
>> + - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
>> +- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
>> + efuse registers that has information about the
>> + speedbin that is used to select the right frequency/voltage
>> + value pair.
>> + Please refer the for nvmem-cells
>> + bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
>> + and also examples below.
>
> Sricharan is also working on adding these, just make sure you guys do the same
> thing..
>

Right, i was adding a similar one for krait cores [1]. There is code common in the
init sequence across both (little). Do you intent to make them common ?

Regards,
Sricharan

[1] https://patchwork.kernel.org/patch/10261873/


--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2018-04-02 17:09    [W:0.059 / U:7.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site