lkml.org 
[lkml]   [2018]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 1/6] dt-bindings: dma: xilinx_dma: Add optional property has_axieth_connected
Date
Add an optional AXI DMA property 'has_axieth_connected'. This can be
specified to indicate that AXI DMA is connected to AXI Ethernet in
hardware design and dma driver needs to do some additional handling.

Signed-off-by: Radhey Shyam Pandey <radheys@xilinx.com>
---
.../devicetree/bindings/dma/xilinx/xilinx_dma.txt | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index a2b8bfa..5d592e3 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -42,6 +42,7 @@ Optional properties:
the hardware.
Optional properties for AXI DMA:
- xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware.
+- xlnx,axieth-connected: Tells whether AXI DMA is connected to AXI Ethernet.
Optional properties for VDMA:
- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
It takes following values:
--
1.7.1
\
 
 \ /
  Last update: 2018-04-02 12:40    [W:0.197 / U:4.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site