lkml.org 
[lkml]   [2018]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/4] dt-bindings:power:supply: Add docs for ADP5061 battery charger
On Wed, Apr 11, 2018 at 06:10:15PM +0300, Stefan Popa wrote:
> Document adi,adp5061 properties.
>
> Signed-off-by: Stefan Popa <stefan.popa@analog.com>
> ---
> Changes in v3:
> - Split devicetree bindings into a separate patch.
>
> .../devicetree/bindings/power/supply/adp5061.txt | 17 +++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 18 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/supply/adp5061.txt
>
> diff --git a/Documentation/devicetree/bindings/power/supply/adp5061.txt b/Documentation/devicetree/bindings/power/supply/adp5061.txt
> new file mode 100644
> index 0000000..7447446
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/adp5061.txt
> @@ -0,0 +1,17 @@
> +Analog Devices ADP5061 Programmable Linear Battery Charger Driver
> +
> +Required properties:
> + - compatible: should be "adi,adp5061"
> + - reg: i2c address of the device
> +
> +The node for this driver must be a child node of a I2C controller, hence
> +all mandatory properties described in
> +Documentation/devicetree/bindings/i2c/i2c.txt
> +must be specified.
> +
> +Example:
> +
> + adp5061@14 {
> + compatible = "adi,adp5061";
> + reg = <0x14>;

Same question as the last version. This seems awfully simple for a
charger. Don't you need to know and describe battery parameters.

Rob

\
 
 \ /
  Last update: 2018-04-13 23:06    [W:0.085 / U:3.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site