lkml.org 
[lkml]   [2018]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 0/8] drm/sun4i: Allwinner MIPI-DSI support
On Fri, Apr 13, 2018 at 5:39 PM, Maxime Ripard
<maxime.ripard@bootlin.com> wrote:
> On Fri, Apr 13, 2018 at 05:30:04PM +0530, Jagan Teki wrote:
>> On Wed, Apr 11, 2018 at 6:13 PM, Maxime Ripard
>> <maxime.ripard@bootlin.com> wrote:
>> > On Wed, Apr 04, 2018 at 11:57:08AM +0200, Maxime Ripard wrote:
>> >> Hi,
>> >>
>> >> Here is an preliminary version of the MIPI-DSI support for the Allwinner
>> >> SoCs.
>> >>
>> >> This controller can be found on a number of recent SoCs, such as the
>> >> A31, A33 or the A64.
>> >>
>> >> Given the sparse documentation, there's a number of obscure areas, but
>> >> the current implementation has been tested with a 4-lanes DSI panel on
>> >> an A33.
>> >>
>> >> The support is a bit rough around the edges at the time, and some artifacts
>> >> are still shown on the screen for some reasons. Wider testing with
>> >> different display will hopefully nail those down.
>> >>
>> >> This needs the regmap_mmio_attach_clk, on its way to Linus in 4.17.
>> >>
>> >> Let me know what you think,
>> >> Maxime
>> >>
>> >> Changes from v3:
>> >> - Rebased on top of current drm-misc-next
>> >> - Switched to SPDX license header
>> >> - Made the ECC array const
>> >> - Split the big DSI patch into two, one to add the DSI driver and one to
>> >> add the TCON bits.
>> >> - Removed the dithering code
>> >> - Changed the DT labels to remove the indices
>> >> - Used sleeps instead of delays in the panel driver
>> >> - Used the backlight_enable / _disable functions
>> >> - Added Chen-Yu's Reviewed-by
>> >>
>> >> Changes from v2:
>> >> - Added a ports node under the DSI node
>> >> - Changed the huarui panel driver to an ili9881c driver
>> >> - Changed the panel vendor to bananapi
>> >> - Made the init table static in the panel driver
>> >> - Dropped the huarui vendor patch for the DT doc.
>> >>
>> >> Changes from v1:
>> >> - Rebased on 4.16-rc1
>> >> - Constified a few function arguments and structures
>> >> - Reworked the DT binding example a bit
>> >> - Reworked the panel driver to check for DSI return codes, and use DCS
>> >> helpers when possible
>> >>
>> >> Maxime Ripard (8):
>> >> drm/sun4i: tcon: Add TRI finish interrupt for vblank
>> >> dt-bindings: display: Add Allwinner MIPI-DSI bindings
>> >> drm/sun4i: Add Allwinner A31 MIPI-DSI controller support
>> >> drm/sun4i: Tie the DSI controller in the TCON
>> >> dt-bindings: panel: Add the Ilitek ILI9881c panel documentation
>> >> drm/panel: Add Ilitek ILI9881c panel driver
>> >> ARM: dts: sun8i: a33: Add the DSI-related nodes
>> >> [DO NOT MERGE] arm: dts: sun8i: bpi-m2m: Add DSI display
>>
>> I have reviewed most of the patches and reused for A64 all look fine
>> to me (except the panel driver). May be my issue is not relevant to
>> this thread, but I'm looking for help If I miss anything for A64 [1]
>> and [2] are changes made for A64, the issue is kernel hang while
>> loading sun6i_dsi.
>
> My guess would be that you're not claiming the DE2 SRAM. See:
> https://lkml.org/lkml/2018/3/16/1096

Thanks Maxime, will try.

\
 
 \ /
  Last update: 2018-04-13 14:19    [W:0.074 / U:4.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site