lkml.org 
[lkml]   [2018]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] ASoC: add tda7419 audio processor driver
On Fri, Mar 09, 2018 at 09:35:48AM -0500, Matt Porter wrote:
> On Wed, Feb 28, 2018 at 11:00:38AM +0000, Mark Brown wrote:
> > On Tue, Feb 27, 2018 at 05:51:28PM -0500, Matt Porter wrote:

> > > +static struct snd_kcontrol_new tda7419_controls[] = {
> > > +SOC_ENUM("Main Source Select", soc_enum_main_src_sel),

> > Should this be a DAPM route?

> Ultimately yes. I initially took the path of ignoring DAPM support in
> interests of getting some clean done. Is it ok to merge DAPM support
> later or do you prefer just having it in the intitial driver? For
> routes, it'll include Main/Second source selects, the Rear Source
> switch, and Mix enable at least.

You definitely shouldn't be implementing things that should be in DAPM
as non-DAPM controls.

> > > + regmap_write(tda7419->regmap, TDA7419_ATTENUATOR_SUB_REG, 0xe0);

> > This looks like it's setting default volumes - just leave those at the
> > chip defaults and let userspace handle setting them, what works for one
> > board may be totally inappropriate on another board and using the chip
> > default means we've got some fixed thing we don't need to discuss.

> This is actually setting the default/cache to the first mute value due
> to the assumption in my implementation of the tda7419-specific get/set
> for these registers. It simplified the code a bit to have these
> initialized like this. e.g. for the attenuator group of registers,
> x11xxxxx are all mute values, so 0xe0 is setting these regs to that
> first mute value to simplify things. I'll take another look at
> eliminating this. As it is, it does not change the fact that the actual
> reset value of 0xff is also mute from a user POV.

If it is useful it definitely needs a comment explaining what's
happening and that there's no practical change to the configuration. It
would be nicer to be robust against the device getting a wider range of
values in the register but that seems plausible.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-03-09 16:29    [W:0.091 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site