[lkml]   [2018]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v5 03/16] media: rkisp1: Add user space ABI definitions
On 08/03/18 11:00, Jacob Chen wrote:
> Hi Hans,
> 2018-02-07 20:00 GMT+08:00 Hans Verkuil <>:
>> On 12/29/17 08:52, Shunqian Zheng wrote:
>>> From: Jeffy Chen <>
>>> Add the header for userspace
>> General note: I saw four cases where this documentation referred to the
>> datasheet. Three comments on that:
>> 1) You don't say which datasheet.
>> 2) I assume the datasheet is under NDA?
> This datasheet can't be got by customers, even under NDA.

OK. This should be mentioned somewhere.

>> 3) You do need to give enough information so a reasonable default can be
>> used. I mentioned in an earlier review that creating an initial params
>> struct that can be used as a templete would be helpful (or even
>> required), and that would be a good place to put such defaults.
> It don't need a default config
> For applcation writers, they can just init it with zero data, and only
> set value for the part they concerned.

This too should be clearly documented. This is very useful information for
users of this API.

> As for ABI, i have checked there is no mismatches.
> Those structures is 32 bit aligned both in 64bit/32bit env, since
> there is no 64bit value.
> "__attribute__ ((packed))" can avoid mismatches happen when we add a
> 64bit value to those structures.
> As robin said, enums and bools are not guaranteed to be consistent
> between different compiler, so it's a potential risk.
> I have replace bools with unsigned char and enums with unsigned int.




 \ /
  Last update: 2018-03-09 14:14    [W:0.076 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site