[lkml]   [2018]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 4.16-rc2+git: pata_serverworks: hanging ata detection thread on HP DL380G3


On Thursday, March 29, 2018 11:54:09 AM Meelis Roos wrote:
> > 4.16 git bootup on HP Proliant DL380 G3 pauses for a a minute or two and
> > then continues with "blocked for more than 120 seconds" message with
> > libata detection functions in ther stack -
> > async_synchronize_cookie_domain() as the last. It seems to happen during
> > IDE CD-ROM detection (detected before but registered as sr0 after the
> > warning). After detection, the eject button on the drive did not work.
> >
> >
> > pata_serverworks is the libata driver in use.

There were no changes to pata_serverworks since 2014 and libata changes
in v4.16 look obviously correct..

> This is still the same in 4.16.0-rc7-00062-g0b412605ef5f.

Any chance that you could bisect this issue?

Best regards,
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

 \ /
  Last update: 2018-03-29 12:13    [W:0.079 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site