lkml.org 
[lkml]   [2018]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] watchdog: add Gateworks System Controller support
Date
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
drivers/watchdog/Kconfig | 10 ++++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/gsc_wdt.c | 146 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 157 insertions(+)
create mode 100644 drivers/watchdog/gsc_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ca200d1..c9d4b2e 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -150,6 +150,16 @@ config GPIO_WATCHDOG_ARCH_INITCALL
arch_initcall.
If in doubt, say N.

+config GSC_WATCHDOG
+ tristate "Gateworks System Controller (GSC) Watchdog support"
+ depends on MFD_GATEWORKS_GSC
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the GSC Watchdog.
+
+ This driver can also be built as a module. If so the module
+ will be called gsc_wdt.
+
config MENF21BMC_WATCHDOG
tristate "MEN 14F021P00 BMC Watchdog"
depends on MFD_MENF21BMC || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 715a210..499327e 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -215,6 +215,7 @@ obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o
+obj-$(CONFIG_GSC_WATCHDOG) += gsc_wdt.o
obj-$(CONFIG_TANGOX_WATCHDOG) += tangox_wdt.o
obj-$(CONFIG_WDAT_WDT) += wdat_wdt.o
obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
diff --git a/drivers/watchdog/gsc_wdt.c b/drivers/watchdog/gsc_wdt.c
new file mode 100644
index 0000000..b43d083
--- /dev/null
+++ b/drivers/watchdog/gsc_wdt.c
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Gateworks Corporation
+ *
+ * This driver registers a Linux Watchdog for the GSC
+ */
+#include <linux/mfd/gsc.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+#define WDT_DEFAULT_TIMEOUT 60
+
+struct gsc_wdt {
+ struct watchdog_device wdt_dev;
+ struct gsc_dev *gsc;
+};
+
+static int gsc_wdt_start(struct watchdog_device *wdd)
+{
+ struct gsc_wdt *wdt = watchdog_get_drvdata(wdd);
+ unsigned int reg = (1 << GSC_CTRL_1_WDT_ENABLE);
+ int ret;
+
+ dev_dbg(wdd->parent, "%s timeout=%d\n", __func__, wdd->timeout);
+
+ /* clear first as regmap_update_bits will not write if no change */
+ ret = regmap_update_bits(wdt->gsc->regmap, GSC_CTRL_1, reg, 0);
+ if (ret)
+ return ret;
+ return regmap_update_bits(wdt->gsc->regmap, GSC_CTRL_1, reg, reg);
+}
+
+static int gsc_wdt_stop(struct watchdog_device *wdd)
+{
+ struct gsc_wdt *wdt = watchdog_get_drvdata(wdd);
+ unsigned int reg = (1 << GSC_CTRL_1_WDT_ENABLE);
+
+ dev_dbg(wdd->parent, "%s\n", __func__);
+
+ return regmap_update_bits(wdt->gsc->regmap, GSC_CTRL_1, reg, 0);
+}
+
+static int gsc_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ struct gsc_wdt *wdt = watchdog_get_drvdata(wdd);
+ unsigned int long_sel = 0;
+
+ dev_dbg(wdd->parent, "%s: %d\n", __func__, timeout);
+
+ switch (timeout) {
+ case 60:
+ long_sel = (1 << GSC_CTRL_1_WDT_TIME);
+ case 30:
+ regmap_update_bits(wdt->gsc->regmap, GSC_CTRL_1,
+ (1 << GSC_CTRL_1_WDT_TIME),
+ (long_sel << GSC_CTRL_1_WDT_TIME));
+ wdd->timeout = timeout;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static const struct watchdog_info gsc_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = "GSC Watchdog"
+};
+
+static const struct watchdog_ops gsc_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = gsc_wdt_start,
+ .stop = gsc_wdt_stop,
+ .set_timeout = gsc_wdt_set_timeout,
+};
+
+static int gsc_wdt_probe(struct platform_device *pdev)
+{
+ struct gsc_dev *gsc = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct gsc_wdt *wdt;
+ int ret;
+ unsigned int reg;
+
+ wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ /* ensure GSC fw supports WD functionality */
+ if (gsc->fwver < 44) {
+ dev_err(dev, "fw v44 or newer required for wdt function\n");
+ return -EINVAL;
+ }
+
+ /* ensure WD bit enabled */
+ if (regmap_read(gsc->regmap, GSC_CTRL_1, &reg))
+ return -EIO;
+ if (!(reg & (1 << GSC_CTRL_1_WDT_ENABLE))) {
+ dev_err(dev, "not enabled - must be manually enabled\n");
+ return -EINVAL;
+ }
+
+ platform_set_drvdata(pdev, wdt);
+
+ wdt->gsc = gsc;
+ wdt->wdt_dev.info = &gsc_wdt_info;
+ wdt->wdt_dev.ops = &gsc_wdt_ops;
+ wdt->wdt_dev.status = 0;
+ wdt->wdt_dev.min_timeout = 30;
+ wdt->wdt_dev.max_timeout = 60;
+ wdt->wdt_dev.parent = dev;
+
+ watchdog_set_nowayout(&wdt->wdt_dev, 1);
+ watchdog_init_timeout(&wdt->wdt_dev, WDT_DEFAULT_TIMEOUT, dev);
+
+ watchdog_set_drvdata(&wdt->wdt_dev, wdt);
+ ret = devm_watchdog_register_device(dev, &wdt->wdt_dev);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "watchdog driver (timeout=%d sec)\n",
+ wdt->wdt_dev.timeout);
+
+ return 0;
+}
+
+static const struct of_device_id gsc_wdt_dt_ids[] = {
+ { .compatible = "gw,gsc-watchdog", },
+ {}
+};
+
+static struct platform_driver gsc_wdt_driver = {
+ .probe = gsc_wdt_probe,
+ .driver = {
+ .name = "gsc-wdt",
+ .of_match_table = gsc_wdt_dt_ids,
+ },
+};
+
+module_platform_driver(gsc_wdt_driver);
+
+MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
+MODULE_DESCRIPTION("Gateworks System Controller Watchdog driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
\
 
 \ /
  Last update: 2018-03-28 17:15    [W:0.114 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site