lkml.org 
[lkml]   [2018]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 08/12] PCI: endpoint: Handle 64-bit BARs properly
Date
If a 64-bit BAR was set-up, we need to skip a BAR,
since a 64-bit BAR consists of a BAR pair.

We need to check what BAR width the epc->ops->set_bar() specific
implementation actually did set-up, since some drivers, like the
Cadence EP controller, sometimes sets up a 64-bit BAR, even though
a 32-bit BAR was requested.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
drivers/pci/endpoint/functions/pci-epf-test.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index 91274779e59f..d46e3ebabb8e 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -380,6 +380,13 @@ static int pci_epf_test_set_bar(struct pci_epf *epf)
if (bar == test_reg_bar)
return ret;
}
+ /*
+ * pci_epc_set_bar() sets PCI_BASE_ADDRESS_MEM_TYPE_64
+ * if the specific implementation required a 64-bit BAR,
+ * even if we only requested a 32-bit BAR.
+ */
+ if (epf_bar->flags & PCI_BASE_ADDRESS_MEM_TYPE_64)
+ bar++;
}

return 0;
--
2.14.2
\
 
 \ /
  Last update: 2018-03-28 13:52    [W:0.169 / U:5.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site