lkml.org 
[lkml]   [2018]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 3/3] arm64: dts: renesas: Add LVDS decoder to R-Car V3M Eagle
From
Date
Hi Jacopo,

On 03/20/2018 03:01 PM, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Friday, 16 March 2018 17:16:39 EET Jacopo Mondi wrote:
>> The R-Car V3M Eagle board includes a transparent THC63LVD1024 LVDS
>> decoder, connected to the on-chip LVDS encoder output on one side
>> and to HDMI encoder ADV7511w on the other one.
>>
>> As the decoder does not need any configuration it has been so-far
>> omitted from DTS. Now that a driver is available, describe it in DT
>> as well.
>>
>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
>
> The patch looks OK to me, but I think it should be squashed with Niklas' patch
> that added display HDMI output support to the V3M Eagle DT.
>
>> ---
>>
>> List of patch dependencies, as of renesas-drivers-2018-03-13-v4.16-rc5:
>>
>> - [PATCH v2 0/5] arm64: dts: renesas: r8a77970: enable HDMI output
>> which includes DU, LVDS and FCPD enablement from:
>> [PATCH v2 0/5] Add R8A77970/V3MSK LVDS/HDMI support
>> - [PATCH v4] v4l: vsp1: Fix video output on R8A77970
>>
>> Patches to be applied on top of
>> "arm64: dts: renesas: eagle: add HDMI output using the ADV7511W"
>>
>> Thanks
>> j
>> ---
>> arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 33 ++++++++++++++++++++---
>> 1 file changed, 30 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
>> b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index c0fd144..69f43b8
>> 100644
>> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
>> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
>> @@ -42,6 +42,33 @@
>> };
>> };
>> };
>> +
>> + thc63lvd1024: lvds-decoder {
>> + compatible = "thine,thc63lvd1024";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> + reg = <0>;
>> +
>> + thc63lvd1024_in_0: endpoint {
>> + remote-endpoint = <&lvds0_out>;
>> + };
>> + };
>> +
>> + port@2{
>> + reg = <2>;
>> +
>> + thc63lvd1024_out_2: endpoint {
>> + remote-endpoint = <&adv7511_in>;
>> + };
>> +

Remove the empty line above.

>> + };
>> +

Remove the empty line above.

>> + };
>> + };
>> };
>>

--
With best wishes,
Vladimir

\
 
 \ /
  Last update: 2018-03-27 08:28    [W:0.097 / U:4.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site