lkml.org 
[lkml]   [2018]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH v4 3/8] irq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER
Date
From
It looks like the arm irqchip registration mechanism has been copied
into a handful of ports, including arm64 and openrisc. I want to use
this in the RISC-V port, so I thought it would be good to make this
generic instead.

This patch copies the arm definition of CONFIG_MULTI_IRQ_HANDLER into
kernel/irq under CONFIG_GENERIC_IRQ_MULTI_HANDLER. This patch is
currently all dead code, but it will be enabled in the various other
architectures in subsequent patches.

GENERIC_IRQ_MULTI_HANDLER is incompatible with MULTI_IRQ_HANDLER because
they define the same symbols. Multiple generic irqchip drivers select
MULTI_IRQ_HANDLER, which is now defined on all architectures that
provide set_handle_irq(). This patch selects GENERIC_IRQ_MULTI_HANDLER
for all drivers that used to select MULTI_IRQ_HANDLER, but only when
MULTI_IRQ_HANDLER doesn't exist. I'll then convert every architecture
over from MULTI_IRQ_HANDLER to GENERIC_IRQ_MULTI_HANDLER before removing
the extra MULTI_IRQ_HANDLER scaffolding.

CC: Shea Levy <shea@shealevy.com>
CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
---
drivers/irqchip/Kconfig | 8 ++++++++
include/linux/irq.h | 18 ++++++++++++++++++
kernel/irq/Kconfig | 6 ++++++
kernel/irq/handle.c | 15 +++++++++++++++
4 files changed, 47 insertions(+)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index d913aec85109..5af28ac6ce35 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -9,6 +9,7 @@ config ARM_GIC
select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
select MULTI_IRQ_HANDLER
+ select GENERIC_IRQ_MULTI_HANDLER if !MULTI_IRQ_HANDLER
select GENERIC_IRQ_EFFECTIVE_AFF_MASK

config ARM_GIC_PM
@@ -35,6 +36,7 @@ config ARM_GIC_V3
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
+ select GENERIC_IRQ_MULTI_HANDLER if !MULTI_IRQ_HANDLER
select IRQ_DOMAIN_HIERARCHY
select PARTITION_PERCPU
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
@@ -61,6 +63,7 @@ config ARM_VIC
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
+ select GENERIC_IRQ_MULTI_HANDLER if !MULTI_IRQ_HANDLER

config ARM_VIC_NR
int
@@ -88,6 +91,7 @@ config ATMEL_AIC_IRQ
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
+ select GENERIC_IRQ_MULTI_HANDLER if !MULTI_IRQ_HANDLER
select SPARSE_IRQ

config ATMEL_AIC5_IRQ
@@ -95,6 +99,7 @@ config ATMEL_AIC5_IRQ
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
+ select GENERIC_IRQ_MULTI_HANDLER if !MULTI_IRQ_HANDLER
select SPARSE_IRQ

config I8259
@@ -132,6 +137,7 @@ config FARADAY_FTINTC010
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
+ select GENERIC_IRQ_MULTI_HANDLER if !MULTI_IRQ_HANDLER
select SPARSE_IRQ

config HISILICON_IRQ_MBIGEN
@@ -157,6 +163,7 @@ config CLPS711X_IRQCHIP
depends on ARCH_CLPS711X
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
+ select GENERIC_IRQ_MULTI_HANDLER if !MULTI_IRQ_HANDLER
select SPARSE_IRQ
default y

@@ -176,6 +183,7 @@ config ORION_IRQCHIP
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
+ select GENERIC_IRQ_MULTI_HANDLER if !MULTI_IRQ_HANDLER

config PIC32_EVIC
bool
diff --git a/include/linux/irq.h b/include/linux/irq.h
index a0231e96a578..77e97872a13e 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -1170,4 +1170,22 @@ int __ipi_send_mask(struct irq_desc *desc, const struct cpumask *dest);
int ipi_send_single(unsigned int virq, unsigned int cpu);
int ipi_send_mask(unsigned int virq, const struct cpumask *dest);

+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
+/*
+ * Registers a generic IRQ handling function as the top-level IRQ handler in
+ * the system, which is generally the first C code called from an assembly
+ * architecture-specific interrupt handler.
+ *
+ * Returns 0 on success, or -EBUSY if an IRQ handler has already been
+ * registered.
+ */
+int __init set_handle_irq(void (*handle_irq)(struct pt_regs *));
+
+/*
+ * Allows interrupt handlers to find the irqchip that's been registered as the
+ * top-level IRQ handler.
+ */
+extern void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
+#endif
+
#endif /* _LINUX_IRQ_H */
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index 6fc87ccda1d7..8596baa8e53d 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -132,3 +132,9 @@ config GENERIC_IRQ_DEBUGFS
If you don't know what to do here, say N.

endmenu
+
+config GENERIC_IRQ_MULTI_HANDLER
+ depends on !MULTI_IRQ_HANDLER
+ bool
+ help
+ Allow each machine to specify it's own IRQ handler at run time.
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 79f987b942b8..3570c715c3e7 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -20,6 +20,10 @@

#include "internals.h"

+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
+void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
+#endif
+
/**
* handle_bad_irq - handle spurious and unhandled irqs
* @desc: description of the interrupt
@@ -207,3 +211,14 @@ irqreturn_t handle_irq_event(struct irq_desc *desc)
irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
return ret;
}
+
+#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
+int __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
+{
+ if (handle_arch_irq)
+ return -EBUSY;
+
+ handle_arch_irq = handle_irq;
+ return 0;
+}
+#endif
--
2.16.1
\
 
 \ /
  Last update: 2018-03-27 18:20    [W:0.064 / U:3.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site