lkml.org 
[lkml]   [2018]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/1] can: ucan: add driver for Theobroma Systems UCAN devices
From
Date
Where possible we changed dev_XXX to netdev_XXX. and removed all __func__.
netdev_XXX prints the necessary information on the device, bus and netif
The remaining dev_XXX (within probe) are extended such that they print
the string "ucan" (__func__ are also removed)

Am 23.03.18 um 11:12 schrieb Jakob Unterwurzacher:
> On 23.03.18 11:04, Wolfgang Grandegger wrote:
>>
>>> But I'm open to other suggestions (use a fixed "ucan: " prefix?) or to
>>> drop it entirely if you think it is not worth it.
>>
>> But there is already a device prefix, e.g.:
>>
>>    peak_usb 1-6:1.0: PEAK-System PCAN-USB adapter hwrev 28 serial
>> FFFFFFFF (1 channel)
>>    peak_usb 1-6:1.0 can0: attached to PCAN-USB channel 0 (device 255)
>>    ^^^^^^^^
>
> Interesting. Looks like the UCAN driver is missing something to make
> this work:
>
> [   67.792947] usb 5-1.4: ucan_probe: registered UCAN device at can0
>
> I'll take a closer look.
>
> Thanks,
> Jakob

--
Martin Elshuber
Theobroma Systems Design und Consulting GmbH
Seestadtstraße 27 (Aspern IQ), 1220 Wien, Austria
Phone: +43 1 236 98 93-405, Fax: +43 1 236 98 93-9
http://www.theobroma-systems.com


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-03-27 12:19    [W:0.070 / U:1.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site