lkml.org 
[lkml]   [2018]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/8] ARM: davinci: complete the conversion to using the reset framework
Date
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This series converts the only user of the handcoded, mach-specific reset
routines in the davinci platform to using the reset framework.

Patches 1-3 add necessary lookups/DT-properties.

Patches 4-6 fix issues found in the remoteproc davinci driver.

Patch 7 converts the davinci-rproc driver to the reset framework.

Patch 8 removes now dead code.

Philipp: it turned out that it's indeed better to use the reset
controller's device name for the entry lookup.

Tested both in DT and legacy modes by booting the examples from
ti-ipc-rtos recipe in meta-ti.

This series applies on top of David Lechner's common-clk-v9 branch[1]
with Philipp Zabel's reset/next branch[2] pulled in.

It can be found in my github tree as well[3].

[1] git://github.com/dlech/ev3dev-kernel.git common-clk-v9
[2] git://git.pengutronix.de/git/pza/linux reset/next
[3] git@github.com:brgl/linux.git topic/davinci-reset

v1 -> v2:
- fixed the device tree patches the descriptions of which were mixed up
- return -EPROBE_DEFER from davinci-rproc's probe() if we can't get the
reset provider, since it's possible that the lookup table was not yet
registered
- made the local variable naming consistent in the davinci-rproc driver
- fixed a typo in PATCH 5/8

v2 -> v3:
- reworded the commit messages (s/remoteproc: da8xx/remoteproc\/davinci/)
- call clk_disable_unprepare() if reset_control_deassert() fails in
da8xx_rproc_start()
- added a patch fixing the S_IRUGO checkpatch warning, since we're
already modifying this driver anyway
- added a temp variable for code brevity in da8xx_rproc_stop()
- removed patch 1/8 (already applied to reset/next)

Bartosz Golaszewski (8):
ARM: davinci: dts: make psc0 a reset provider
ARM: davinci: dts: add a reset control to the dsp node
clk: davinci: add a reset lookup table for psc0
remoteproc/davinci: add the missing retval check for clk_enable()
remoteproc/davinci: prepare and unprepare the clock where needed
remoteproc/davinci: use octal permissions for module_param()
remoteproc/davinci: use the reset framework
clk: davinci: kill davinci_clk_reset_assert/deassert()

arch/arm/boot/dts/da850.dtsi | 2 ++
arch/arm/mach-davinci/include/mach/clock.h | 21 --------------
drivers/clk/davinci/psc-da850.c | 7 +++++
drivers/clk/davinci/psc.c | 19 +------------
drivers/remoteproc/da8xx_remoteproc.c | 45 ++++++++++++++++++++++++------
5 files changed, 47 insertions(+), 47 deletions(-)
delete mode 100644 arch/arm/mach-davinci/include/mach/clock.h

--
2.16.1

\
 
 \ /
  Last update: 2018-03-27 11:20    [W:0.113 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site