lkml.org 
[lkml]   [2018]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 68/77] scsi: mpt3sas: wait for and flush running commands on shutdown/unload
Date
4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>

commit c666d3be99c000bb889a33353e9be0fa5808d3de upstream.

This patch finishes all outstanding SCSI IO commands (but not other commands,
e.g., task management) in the shutdown and unload paths.

It first waits for the commands to complete (this is done after setting
'ioc->remove_host = 1 ', which prevents new commands to be queued) then it
flushes commands that might still be running.

This avoids triggering error handling (e.g., abort command) for all commands
possibly completed by the adapter after interrupts disabled.

[mauricfo: introduced something in commit message.]

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[mauricfo: backport to linux-4.14.y (a few updates to context lines)]
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/scsi/mpt3sas/mpt3sas_base.c | 8 ++++----
drivers/scsi/mpt3sas/mpt3sas_base.h | 3 +++
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 10 +++++++++-
3 files changed, 16 insertions(+), 5 deletions(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -5659,14 +5659,14 @@ _base_reset_handler(struct MPT3SAS_ADAPT
}

/**
- * _wait_for_commands_to_complete - reset controller
+ * mpt3sas_wait_for_commands_to_complete - reset controller
* @ioc: Pointer to MPT_ADAPTER structure
*
* This function waiting(3s) for all pending commands to complete
* prior to putting controller in reset.
*/
-static void
-_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc)
+void
+mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc)
{
u32 ioc_state;
unsigned long flags;
@@ -5745,7 +5745,7 @@ mpt3sas_base_hard_reset_handler(struct M
is_fault = 1;
}
_base_reset_handler(ioc, MPT3_IOC_PRE_RESET);
- _wait_for_commands_to_complete(ioc);
+ mpt3sas_wait_for_commands_to_complete(ioc);
_base_mask_interrupts(ioc);
r = _base_make_ioc_ready(ioc, type);
if (r)
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1292,6 +1292,9 @@ void mpt3sas_base_update_missing_delay(s

int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc);

+void
+mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc);
+

/* scsih shared API */
u8 mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3960,7 +3960,7 @@ _scsih_flush_running_cmds(struct MPT3SAS
_scsih_set_satl_pending(scmd, false);
mpt3sas_base_free_smid(ioc, smid);
scsi_dma_unmap(scmd);
- if (ioc->pci_error_recovery)
+ if (ioc->pci_error_recovery || ioc->remove_host)
scmd->result = DID_NO_CONNECT << 16;
else
scmd->result = DID_RESET << 16;
@@ -8243,6 +8243,10 @@ static void scsih_remove(struct pci_dev
unsigned long flags;

ioc->remove_host = 1;
+
+ mpt3sas_wait_for_commands_to_complete(ioc);
+ _scsih_flush_running_cmds(ioc);
+
_scsih_fw_event_cleanup_queue(ioc);

spin_lock_irqsave(&ioc->fw_event_lock, flags);
@@ -8313,6 +8317,10 @@ scsih_shutdown(struct pci_dev *pdev)
unsigned long flags;

ioc->remove_host = 1;
+
+ mpt3sas_wait_for_commands_to_complete(ioc);
+ _scsih_flush_running_cmds(ioc);
+
_scsih_fw_event_cleanup_queue(ioc);

spin_lock_irqsave(&ioc->fw_event_lock, flags);

\
 
 \ /
  Last update: 2018-03-23 12:42    [W:0.338 / U:2.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site