lkml.org 
[lkml]   [2018]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 6/8] MIPS: mscc: Add switch to ocelot
On Fri, Mar 23, 2018 at 10:22:30PM +0100, Alexandre Belloni wrote:
> On 23/03/2018 at 14:17:48 -0700, Florian Fainelli wrote:
> > On 03/23/2018 01:11 PM, Alexandre Belloni wrote:
> > > +
> > > + phy0: ethernet-phy@0 {
> > > + reg = <0>;
> > > + };
> > > + phy1: ethernet-phy@1 {
> > > + reg = <1>;
> > > + };
> > > + phy2: ethernet-phy@2 {
> > > + reg = <2>;
> > > + };
> > > + phy3: ethernet-phy@3 {
> > > + reg = <3>;
> > > + };
> >
> > These PHYs should be defined at the board DTS level.
>
> Those are internal PHYs, present on the SoC, I doubt anyone will have
> anything different while using the same SoC.

With DSA, there is no need to list internal PHYs.

That is the trade off of having a standalone MDIO bus driver. Maybe
add a phandle to the internal MDIO bus? The switch driver could then
follow the phandle, and direct connect the internal PHYs?

Andrew

\
 
 \ /
  Last update: 2018-03-23 22:34    [W:0.084 / U:16.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site