lkml.org 
[lkml]   [2018]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 1/8] net: phy: Add initial support for Microsemi Ocelot internal PHYs.
On Fri, Mar 23, 2018 at 09:11:10PM +0100, Alexandre Belloni wrote:
> Add Microsemi Ocelot internal PHY ids. For now, simply use the genphy
> functions but more features are available.
>
> Cc: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> drivers/net/phy/mscc.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
> index 650c2667d523..e1ab3acd1cdb 100644
> --- a/drivers/net/phy/mscc.c
> +++ b/drivers/net/phy/mscc.c
> @@ -91,6 +91,7 @@ enum rgmii_rx_clock_delay {
> #define SECURE_ON_PASSWD_LEN_4 0x4000
>
> /* Microsemi PHY ID's */
> +#define PHY_ID_OCELOT 0x00070540
> #define PHY_ID_VSC8530 0x00070560
> #define PHY_ID_VSC8531 0x00070570
> #define PHY_ID_VSC8540 0x00070760
> @@ -658,6 +659,19 @@ static int vsc85xx_probe(struct phy_device *phydev)
>
> /* Microsemi VSC85xx PHYs */
> static struct phy_driver vsc85xx_driver[] = {
> +{
> + .phy_id = PHY_ID_OCELOT,
> + .name = "Microsemi OCELOT",
> + .phy_id_mask = 0xfffffff0,
> + .features = PHY_GBIT_FEATURES,

No interrupt support? In fact, the only advantage i see this brings
over the generic driver is that the name Microsemi OCELOT is printed.

Andrew

> + .soft_reset = &genphy_soft_reset,
> + .config_init = &genphy_config_init,
> + .config_aneg = &genphy_config_aneg,
> + .aneg_done = &genphy_aneg_done,
> + .read_status = &genphy_read_status,
> + .suspend = &genphy_suspend,
> + .resume = &genphy_resume,
> +},

\
 
 \ /
  Last update: 2018-03-23 21:30    [W:0.176 / U:1.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site