lkml.org 
[lkml]   [2018]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] dma-mapping: move dma configuration to bus infrastructure
> +static int amba_dma_configure(struct device *dev)
> +{
> + return dma_common_configure(dev);
> +}

So it turns out we only end with two callers of dma_common_configure
after this series. Based ont hat I'm tempted with the suggestion
from Robin to just have amba call platform_dma_configure, and move
the code from dma_common_configure to platform_dma_configure.

> +int dma_configure(struct device *dev)
> +{
> + if (dev->bus->dma_configure)
> + return dev->bus->dma_configure(dev);
> +
> + return 0;
> +}
> void dma_deconfigure(struct device *dev)

As grep pointed out this wants a blank line after the function, and while
in nitpicking mode I'd suggest to remove the blank line above the return
statement while at it.

> diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c
> index 88a3558..fa9896d 100644
> --- a/drivers/gpu/host1x/bus.c
> +++ b/drivers/gpu/host1x/bus.c
> @@ -314,6 +314,14 @@ static int host1x_device_match(struct device *dev, struct device_driver *drv)
> return strcmp(dev_name(dev), drv->name) == 0;
> }
>
> +static int host1x_dma_configure(struct device *dev)
> +{
> + if (dev->of_node)
> + return of_dma_configure(dev, dev->of_node);
> +
> + return 0;

Same here.

> + */
> +static int pci_dma_configure(struct device *dev)
> +{
> + struct device *bridge;
> + enum dev_dma_attr attr;
> + int ret = 0;
> +
> + bridge = pci_get_host_bridge_device(to_pci_dev(dev));
> +
> + if (IS_ENABLED(CONFIG_OF) && bridge->parent &&
> + bridge->parent->of_node) {
> + ret = of_dma_configure(dev, bridge->parent->of_node);
> + } else if (has_acpi_companion(bridge)) {
> + attr = acpi_get_dma_attr(to_acpi_device_node(bridge->fwnode));
> + if (attr != DEV_DMA_NOT_SUPPORTED)
> + ret = acpi_dma_configure(dev, attr);
> + }

The attr declaration can be moved into the inner scope here.

> + pci_put_host_bridge_device(bridge);
> +
> + return ret;

Drop the blank line after the return, please.

\
 
 \ /
  Last update: 2018-03-22 09:16    [W:0.406 / U:1.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site