lkml.org 
[lkml]   [2018]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 1/6] dt-bindings: add bindings for USB physical connector
Hi,

On Tue, Feb 27, 2018 at 08:11:29AM +0100, Andrzej Hajda wrote:
> +2. USB-C connector attached to CC controller (s2mm005), HS lines routed
> +to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
> +DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
> +
> +ccic: s2mm005@33 {
> + ...
> + usb_con: connector {
> + compatible = "usb-c-connector";
> + label = "USB-C";

Is this child node really necessary? There will never be more then
one connector per CC line.

We should prefer device_graph* functions over of_graph* and
acpi_graph* functions in the drivers so we don't have to handle the
same thing multiple times with separate APIs. Is it still possible if
there is that connector child node?

> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + usb_con_hs: endpoint {
> + remote-endpoint = <&max77865_usbc_hs>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + usb_con_ss: endpoint {
> + remote-endpoint = <&usbdrd_phy_ss>;
> + };
> + };
> + port@2 {
> + reg = <2>;
> + usb_con_sbu: endpoint {
> + remote-endpoint = <&dp_aux>;
> + };
> + };
> + };
> + };
> +};


Thanks,

--
heikki

\
 
 \ /
  Last update: 2018-03-02 14:14    [W:0.087 / U:1.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site