[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [linux-sunxi] [PATCH v4 4/9] pinctrl: sunxi: add support for the Allwinner H6 main pin controller

On 16/03/18 14:02, Icenowy Zheng wrote:
> The Allwinner H6 SoC has two pin controllers, one main controller
> (called CPUX-PORT in user manual) and one controller in CPUs power
> domain (called CPUS-PORT in user manual).
> This commit introduces support for the main pin controller on H6.
> The pin bank A and B are not wired out and hidden from the SoC's
> documents, however it's shown that the "ATE" (an AC200 chip
> co-packaged with the H6 die) is connected to the main SoC die via these
> pin banks. The information about these banks is just copied from the BSP
> pinctrl driver, but re-formatted to fit the mainline pinctrl driver
> format. The GPIO functions are dropped, as they're impossible to use --
> except a GPIO&IRQ only pin (PB20) which might be the IRQ of ATE.
> Signed-off-by: Icenowy Zheng <>
> Acked-by: Rob Herring <>

As mentioned before, I checked every single pin against the manual and
this looks correct to me.

Reviewed-by: Andre Przywara <>


 \ /
  Last update: 2018-03-16 18:08    [W:0.177 / U:3.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site