lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Blackfin removal] [PATCH 16/28] irda: Remove Blackfin IRDA support
Date
Signed-off-by: Aaron Wu <aaron.wu@analog.com>

Remove Blackfin IRDA support
---
drivers/staging/irda/drivers/Kconfig | 45 --
drivers/staging/irda/drivers/Makefile | 1 -
drivers/staging/irda/drivers/bfin_sir.c | 819 --------------------------------
drivers/staging/irda/drivers/bfin_sir.h | 93 ----
4 files changed, 958 deletions(-)
delete mode 100644 drivers/staging/irda/drivers/bfin_sir.c
delete mode 100644 drivers/staging/irda/drivers/bfin_sir.h

diff --git a/drivers/staging/irda/drivers/Kconfig b/drivers/staging/irda/drivers/Kconfig
index e070e12..71ac76c 100644
--- a/drivers/staging/irda/drivers/Kconfig
+++ b/drivers/staging/irda/drivers/Kconfig
@@ -17,51 +17,6 @@ config IRTTY_SIR

If unsure, say Y.

-config BFIN_SIR
- tristate "Blackfin SIR on UART"
- depends on BLACKFIN && IRDA
- default n
- help
- Say Y here if your want to enable SIR function on Blackfin UART
- devices.
-
- To activate this driver you can start irattach like:
- "irattach irda0 -s"
-
- Saying M, it will be built as a module named bfin_sir.
-
- Note that you need to turn off one of the serial drivers for SIR
- to use that UART.
-
-config BFIN_SIR0
- bool "Blackfin SIR on UART0"
- depends on BFIN_SIR && !SERIAL_BFIN_UART0
-
-config BFIN_SIR1
- bool "Blackfin SIR on UART1"
- depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
-
-config BFIN_SIR2
- bool "Blackfin SIR on UART2"
- depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
-
-config BFIN_SIR3
- bool "Blackfin SIR on UART3"
- depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
-
-choice
- prompt "SIR Mode"
- depends on BFIN_SIR
- default SIR_BFIN_DMA
-
-config SIR_BFIN_DMA
- bool "DMA mode"
- depends on !DMA_UNCACHED_NONE
-
-config SIR_BFIN_PIO
- bool "PIO mode"
-endchoice
-
config SH_SIR
tristate "SuperH SIR on UART"
depends on IRDA && SUPERH && \
diff --git a/drivers/staging/irda/drivers/Makefile b/drivers/staging/irda/drivers/Makefile
index e2901b1..d5307ed 100644
--- a/drivers/staging/irda/drivers/Makefile
+++ b/drivers/staging/irda/drivers/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_MCS_FIR) += mcs7780.o
obj-$(CONFIG_AU1000_FIR) += au1k_ir.o
# SIR drivers
obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o
-obj-$(CONFIG_BFIN_SIR) += bfin_sir.o
obj-$(CONFIG_SH_SIR) += sh_sir.o
# dongle drivers for SIR drivers
obj-$(CONFIG_ESI_DONGLE) += esi-sir.o
diff --git a/drivers/staging/irda/drivers/bfin_sir.c b/drivers/staging/irda/drivers/bfin_sir.c
deleted file mode 100644
index 59e409b..0000000
--- a/drivers/staging/irda/drivers/bfin_sir.c
+++ /dev/null
@@ -1,819 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-#include "bfin_sir.h"
-
-#ifdef CONFIG_SIR_BFIN_DMA
-#define DMA_SIR_RX_XCNT 10
-#define DMA_SIR_RX_YCNT (PAGE_SIZE / DMA_SIR_RX_XCNT)
-#define DMA_SIR_RX_FLUSH_JIFS (HZ * 4 / 250)
-#endif
-
-#if ANOMALY_05000447
-static int max_rate = 57600;
-#else
-static int max_rate = 115200;
-#endif
-
-static void bfin_sir_rx_dma_timeout(struct timer_list *t);
-
-static void turnaround_delay(int mtt)
-{
- long ticks;
-
- mtt = mtt < 10000 ? 10000 : mtt;
- ticks = 1 + mtt / (USEC_PER_SEC / HZ);
- schedule_timeout_uninterruptible(ticks);
-}
-
-static void bfin_sir_init_ports(struct bfin_sir_port *sp, struct platform_device *pdev)
-{
- int i;
- struct resource *res;
-
- for (i = 0; i < pdev->num_resources; i++) {
- res = &pdev->resource[i];
- switch (res->flags) {
- case IORESOURCE_MEM:
- sp->membase = (void __iomem *)res->start;
- break;
- case IORESOURCE_IRQ:
- sp->irq = res->start;
- break;
- case IORESOURCE_DMA:
- sp->rx_dma_channel = res->start;
- sp->tx_dma_channel = res->end;
- break;
- default:
- break;
- }
- }
-
- sp->clk = get_sclk();
-#ifdef CONFIG_SIR_BFIN_DMA
- sp->tx_done = 1;
- timer_setup(&sp->rx_dma_timer, bfin_sir_rx_dma_timeout, 0);
-#endif
-}
-
-static void bfin_sir_stop_tx(struct bfin_sir_port *port)
-{
-#ifdef CONFIG_SIR_BFIN_DMA
- disable_dma(port->tx_dma_channel);
-#endif
-
- while (!(UART_GET_LSR(port) & THRE)) {
- cpu_relax();
- continue;
- }
-
- UART_CLEAR_IER(port, ETBEI);
-}
-
-static void bfin_sir_enable_tx(struct bfin_sir_port *port)
-{
- UART_SET_IER(port, ETBEI);
-}
-
-static void bfin_sir_stop_rx(struct bfin_sir_port *port)
-{
- UART_CLEAR_IER(port, ERBFI);
-}
-
-static void bfin_sir_enable_rx(struct bfin_sir_port *port)
-{
- UART_SET_IER(port, ERBFI);
-}
-
-static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
-{
- int ret = -EINVAL;
- unsigned int quot;
- unsigned short val, lsr, lcr;
- static int utime;
- int count = 10;
-
- lcr = WLS(8);
-
- switch (speed) {
- case 9600:
- case 19200:
- case 38400:
- case 57600:
- case 115200:
-
- /*
- * IRDA is not affected by anomaly 05000230, so there is no
- * need to tweak the divisor like he UART driver (which will
- * slightly speed up the baud rate on us).
- */
- quot = (port->clk + (8 * speed)) / (16 * speed);
-
- do {
- udelay(utime);
- lsr = UART_GET_LSR(port);
- } while (!(lsr & TEMT) && count--);
-
- /* The useconds for 1 bits to transmit */
- utime = 1000000 / speed + 1;
-
- /* Clear UCEN bit to reset the UART state machine
- * and control registers
- */
- val = UART_GET_GCTL(port);
- val &= ~UCEN;
- UART_PUT_GCTL(port, val);
-
- /* Set DLAB in LCR to Access THR RBR IER */
- UART_SET_DLAB(port);
- SSYNC();
-
- UART_PUT_DLL(port, quot & 0xFF);
- UART_PUT_DLH(port, (quot >> 8) & 0xFF);
- SSYNC();
-
- /* Clear DLAB in LCR */
- UART_CLEAR_DLAB(port);
- SSYNC();
-
- UART_PUT_LCR(port, lcr);
-
- val = UART_GET_GCTL(port);
- val |= UCEN;
- UART_PUT_GCTL(port, val);
-
- ret = 0;
- break;
- default:
- printk(KERN_WARNING "bfin_sir: Invalid speed %d\n", speed);
- break;
- }
-
- val = UART_GET_GCTL(port);
- /* If not add the 'RPOLC', we can't catch the receive interrupt.
- * It's related with the HW layout and the IR transiver.
- */
- val |= UMOD_IRDA | RPOLC;
- UART_PUT_GCTL(port, val);
- return ret;
-}
-
-static int bfin_sir_is_receiving(struct net_device *dev)
-{
- struct bfin_sir_self *self = netdev_priv(dev);
- struct bfin_sir_port *port = self->sir_port;
-
- if (!(UART_GET_IER(port) & ERBFI))
- return 0;
- return self->rx_buff.state != OUTSIDE_FRAME;
-}
-
-#ifdef CONFIG_SIR_BFIN_PIO
-static void bfin_sir_tx_chars(struct net_device *dev)
-{
- unsigned int chr;
- struct bfin_sir_self *self = netdev_priv(dev);
- struct bfin_sir_port *port = self->sir_port;
-
- if (self->tx_buff.len != 0) {
- chr = *(self->tx_buff.data);
- UART_PUT_CHAR(port, chr);
- self->tx_buff.data++;
- self->tx_buff.len--;
- } else {
- self->stats.tx_packets++;
- self->stats.tx_bytes += self->tx_buff.data - self->tx_buff.head;
- if (self->newspeed) {
- bfin_sir_set_speed(port, self->newspeed);
- self->speed = self->newspeed;
- self->newspeed = 0;
- }
- bfin_sir_stop_tx(port);
- bfin_sir_enable_rx(port);
- /* I'm hungry! */
- netif_wake_queue(dev);
- }
-}
-
-static void bfin_sir_rx_chars(struct net_device *dev)
-{
- struct bfin_sir_self *self = netdev_priv(dev);
- struct bfin_sir_port *port = self->sir_port;
- unsigned char ch;
-
- UART_CLEAR_LSR(port);
- ch = UART_GET_CHAR(port);
- async_unwrap_char(dev, &self->stats, &self->rx_buff, ch);
-}
-
-static irqreturn_t bfin_sir_rx_int(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct bfin_sir_self *self = netdev_priv(dev);
- struct bfin_sir_port *port = self->sir_port;
-
- spin_lock(&self->lock);
- while ((UART_GET_LSR(port) & DR))
- bfin_sir_rx_chars(dev);
- spin_unlock(&self->lock);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t bfin_sir_tx_int(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct bfin_sir_self *self = netdev_priv(dev);
- struct bfin_sir_port *port = self->sir_port;
-
- spin_lock(&self->lock);
- if (UART_GET_LSR(port) & THRE)
- bfin_sir_tx_chars(dev);
- spin_unlock(&self->lock);
-
- return IRQ_HANDLED;
-}
-#endif /* CONFIG_SIR_BFIN_PIO */
-
-#ifdef CONFIG_SIR_BFIN_DMA
-static void bfin_sir_dma_tx_chars(struct net_device *dev)
-{
- struct bfin_sir_self *self = netdev_priv(dev);
- struct bfin_sir_port *port = self->sir_port;
-
- if (!port->tx_done)
- return;
- port->tx_done = 0;
-
- if (self->tx_buff.len == 0) {
- self->stats.tx_packets++;
- if (self->newspeed) {
- bfin_sir_set_speed(port, self->newspeed);
- self->speed = self->newspeed;
- self->newspeed = 0;
- }
- bfin_sir_enable_rx(port);
- port->tx_done = 1;
- netif_wake_queue(dev);
- return;
- }
-
- blackfin_dcache_flush_range((unsigned long)(self->tx_buff.data),
- (unsigned long)(self->tx_buff.data+self->tx_buff.len));
- set_dma_config(port->tx_dma_channel,
- set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
- INTR_ON_BUF, DIMENSION_LINEAR, DATA_SIZE_8,
- DMA_SYNC_RESTART));
- set_dma_start_addr(port->tx_dma_channel,
- (unsigned long)(self->tx_buff.data));
- set_dma_x_count(port->tx_dma_channel, self->tx_buff.len);
- set_dma_x_modify(port->tx_dma_channel, 1);
- enable_dma(port->tx_dma_channel);
-}
-
-static irqreturn_t bfin_sir_dma_tx_int(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct bfin_sir_self *self = netdev_priv(dev);
- struct bfin_sir_port *port = self->sir_port;
-
- spin_lock(&self->lock);
- if (!(get_dma_curr_irqstat(port->tx_dma_channel) & DMA_RUN)) {
- clear_dma_irqstat(port->tx_dma_channel);
- bfin_sir_stop_tx(port);
-
- self->stats.tx_packets++;
- self->stats.tx_bytes += self->tx_buff.len;
- self->tx_buff.len = 0;
- if (self->newspeed) {
- bfin_sir_set_speed(port, self->newspeed);
- self->speed = self->newspeed;
- self->newspeed = 0;
- }
- bfin_sir_enable_rx(port);
- /* I'm hungry! */
- netif_wake_queue(dev);
- port->tx_done = 1;
- }
- spin_unlock(&self->lock);
-
- return IRQ_HANDLED;
-}
-
-static void bfin_sir_dma_rx_chars(struct net_device *dev)
-{
- struct bfin_sir_self *self = netdev_priv(dev);
- struct bfin_sir_port *port = self->sir_port;
- int i;
-
- UART_CLEAR_LSR(port);
-
- for (i = port->rx_dma_buf.head; i < port->rx_dma_buf.tail; i++)
- async_unwrap_char(dev, &self->stats, &self->rx_buff, port->rx_dma_buf.buf[i]);
-}
-
-static void bfin_sir_rx_dma_timeout(struct timer_list *t)
-{
- struct bfin_sir_port *port = from_timer(port, t, rx_dma_timer);
- struct net_device *dev = port->dev;
- struct bfin_sir_self *self = netdev_priv(dev);
-
- int x_pos, pos;
- unsigned long flags;
-
- spin_lock_irqsave(&self->lock, flags);
- x_pos = DMA_SIR_RX_XCNT - get_dma_curr_xcount(port->rx_dma_channel);
- if (x_pos == DMA_SIR_RX_XCNT)
- x_pos = 0;
-
- pos = port->rx_dma_nrows * DMA_SIR_RX_XCNT + x_pos;
-
- if (pos > port->rx_dma_buf.tail) {
- port->rx_dma_buf.tail = pos;
- bfin_sir_dma_rx_chars(dev);
- port->rx_dma_buf.head = port->rx_dma_buf.tail;
- }
- spin_unlock_irqrestore(&self->lock, flags);
-}
-
-static irqreturn_t bfin_sir_dma_rx_int(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct bfin_sir_self *self = netdev_priv(dev);
- struct bfin_sir_port *port = self->sir_port;
- unsigned short irqstat;
-
- spin_lock(&self->lock);
-
- port->rx_dma_nrows++;
- port->rx_dma_buf.tail = DMA_SIR_RX_XCNT * port->rx_dma_nrows;
- bfin_sir_dma_rx_chars(dev);
- if (port->rx_dma_nrows >= DMA_SIR_RX_YCNT) {
- port->rx_dma_nrows = 0;
- port->rx_dma_buf.tail = 0;
- }
- port->rx_dma_buf.head = port->rx_dma_buf.tail;
-
- irqstat = get_dma_curr_irqstat(port->rx_dma_channel);
- clear_dma_irqstat(port->rx_dma_channel);
- spin_unlock(&self->lock);
-
- mod_timer(&port->rx_dma_timer, jiffies + DMA_SIR_RX_FLUSH_JIFS);
- return IRQ_HANDLED;
-}
-#endif /* CONFIG_SIR_BFIN_DMA */
-
-static int bfin_sir_startup(struct bfin_sir_port *port, struct net_device *dev)
-{
-#ifdef CONFIG_SIR_BFIN_DMA
- dma_addr_t dma_handle;
-#endif /* CONFIG_SIR_BFIN_DMA */
-
- if (request_dma(port->rx_dma_channel, "BFIN_UART_RX") < 0) {
- dev_warn(&dev->dev, "Unable to attach SIR RX DMA channel\n");
- return -EBUSY;
- }
-
- if (request_dma(port->tx_dma_channel, "BFIN_UART_TX") < 0) {
- dev_warn(&dev->dev, "Unable to attach SIR TX DMA channel\n");
- free_dma(port->rx_dma_channel);
- return -EBUSY;
- }
-
-#ifdef CONFIG_SIR_BFIN_DMA
-
- set_dma_callback(port->rx_dma_channel, bfin_sir_dma_rx_int, dev);
- set_dma_callback(port->tx_dma_channel, bfin_sir_dma_tx_int, dev);
-
- port->rx_dma_buf.buf = dma_alloc_coherent(NULL, PAGE_SIZE,
- &dma_handle, GFP_DMA);
- port->rx_dma_buf.head = 0;
- port->rx_dma_buf.tail = 0;
- port->rx_dma_nrows = 0;
-
- set_dma_config(port->rx_dma_channel,
- set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
- INTR_ON_ROW, DIMENSION_2D,
- DATA_SIZE_8, DMA_SYNC_RESTART));
- set_dma_x_count(port->rx_dma_channel, DMA_SIR_RX_XCNT);
- set_dma_x_modify(port->rx_dma_channel, 1);
- set_dma_y_count(port->rx_dma_channel, DMA_SIR_RX_YCNT);
- set_dma_y_modify(port->rx_dma_channel, 1);
- set_dma_start_addr(port->rx_dma_channel, (unsigned long)port->rx_dma_buf.buf);
- enable_dma(port->rx_dma_channel);
-
-
-#else
-
- if (request_irq(port->irq, bfin_sir_rx_int, 0, "BFIN_SIR_RX", dev)) {
- dev_warn(&dev->dev, "Unable to attach SIR RX interrupt\n");
- return -EBUSY;
- }
-
- if (request_irq(port->irq+1, bfin_sir_tx_int, 0, "BFIN_SIR_TX", dev)) {
- dev_warn(&dev->dev, "Unable to attach SIR TX interrupt\n");
- free_irq(port->irq, dev);
- return -EBUSY;
- }
-#endif
-
- return 0;
-}
-
-static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev)
-{
- unsigned short val;
-
- bfin_sir_stop_rx(port);
-
- val = UART_GET_GCTL(port);
- val &= ~(UCEN | UMOD_MASK | RPOLC);
- UART_PUT_GCTL(port, val);
-
-#ifdef CONFIG_SIR_BFIN_DMA
- disable_dma(port->tx_dma_channel);
- disable_dma(port->rx_dma_channel);
- del_timer(&(port->rx_dma_timer));
- dma_free_coherent(NULL, PAGE_SIZE, port->rx_dma_buf.buf, 0);
-#else
- free_irq(port->irq+1, dev);
- free_irq(port->irq, dev);
-#endif
- free_dma(port->tx_dma_channel);
- free_dma(port->rx_dma_channel);
-}
-
-#ifdef CONFIG_PM
-static int bfin_sir_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct bfin_sir_port *sir_port;
- struct net_device *dev;
- struct bfin_sir_self *self;
-
- sir_port = platform_get_drvdata(pdev);
- if (!sir_port)
- return 0;
-
- dev = sir_port->dev;
- self = netdev_priv(dev);
- if (self->open) {
- flush_work(&self->work);
- bfin_sir_shutdown(self->sir_port, dev);
- netif_device_detach(dev);
- }
-
- return 0;
-}
-static int bfin_sir_resume(struct platform_device *pdev)
-{
- struct bfin_sir_port *sir_port;
- struct net_device *dev;
- struct bfin_sir_self *self;
- struct bfin_sir_port *port;
-
- sir_port = platform_get_drvdata(pdev);
- if (!sir_port)
- return 0;
-
- dev = sir_port->dev;
- self = netdev_priv(dev);
- port = self->sir_port;
- if (self->open) {
- if (self->newspeed) {
- self->speed = self->newspeed;
- self->newspeed = 0;
- }
- bfin_sir_startup(port, dev);
- bfin_sir_set_speed(port, 9600);
- bfin_sir_enable_rx(port);
- netif_device_attach(dev);
- }
- return 0;
-}
-#else
-#define bfin_sir_suspend NULL
-#define bfin_sir_resume NULL
-#endif
-
-static void bfin_sir_send_work(struct work_struct *work)
-{
- struct bfin_sir_self *self = container_of(work, struct bfin_sir_self, work);
- struct net_device *dev = self->sir_port->dev;
- struct bfin_sir_port *port = self->sir_port;
- unsigned short val;
- int tx_cnt = 10;
-
- while (bfin_sir_is_receiving(dev) && --tx_cnt)
- turnaround_delay(self->mtt);
-
- bfin_sir_stop_rx(port);
-
- /* To avoid losting RX interrupt, we reset IR function before
- * sending data. We also can set the speed, which will
- * reset all the UART.
- */
- val = UART_GET_GCTL(port);
- val &= ~(UMOD_MASK | RPOLC);
- UART_PUT_GCTL(port, val);
- SSYNC();
- val |= UMOD_IRDA | RPOLC;
- UART_PUT_GCTL(port, val);
- SSYNC();
- /* bfin_sir_set_speed(port, self->speed); */
-
-#ifdef CONFIG_SIR_BFIN_DMA
- bfin_sir_dma_tx_chars(dev);
-#endif
- bfin_sir_enable_tx(port);
- netif_trans_update(dev);
-}
-
-static int bfin_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct bfin_sir_self *self = netdev_priv(dev);
- int speed = irda_get_next_speed(skb);
-
- netif_stop_queue(dev);
-
- self->mtt = irda_get_mtt(skb);
-
- if (speed != self->speed && speed != -1)
- self->newspeed = speed;
-
- self->tx_buff.data = self->tx_buff.head;
- if (skb->len == 0)
- self->tx_buff.len = 0;
- else
- self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize);
-
- schedule_work(&self->work);
- dev_kfree_skb(skb);
-
- return 0;
-}
-
-static int bfin_sir_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
-{
- struct if_irda_req *rq = (struct if_irda_req *)ifreq;
- struct bfin_sir_self *self = netdev_priv(dev);
- struct bfin_sir_port *port = self->sir_port;
- int ret = 0;
-
- switch (cmd) {
- case SIOCSBANDWIDTH:
- if (capable(CAP_NET_ADMIN)) {
- if (self->open) {
- ret = bfin_sir_set_speed(port, rq->ifr_baudrate);
- bfin_sir_enable_rx(port);
- } else {
- dev_warn(&dev->dev, "SIOCSBANDWIDTH: !netif_running\n");
- ret = 0;
- }
- }
- break;
-
- case SIOCSMEDIABUSY:
- ret = -EPERM;
- if (capable(CAP_NET_ADMIN)) {
- irda_device_set_media_busy(dev, TRUE);
- ret = 0;
- }
- break;
-
- case SIOCGRECEIVING:
- rq->ifr_receiving = bfin_sir_is_receiving(dev);
- break;
-
- default:
- ret = -EOPNOTSUPP;
- break;
- }
-
- return ret;
-}
-
-static struct net_device_stats *bfin_sir_stats(struct net_device *dev)
-{
- struct bfin_sir_self *self = netdev_priv(dev);
-
- return &self->stats;
-}
-
-static int bfin_sir_open(struct net_device *dev)
-{
- struct bfin_sir_self *self = netdev_priv(dev);
- struct bfin_sir_port *port = self->sir_port;
- int err;
-
- self->newspeed = 0;
- self->speed = 9600;
-
- spin_lock_init(&self->lock);
-
- err = bfin_sir_startup(port, dev);
- if (err)
- goto err_startup;
-
- bfin_sir_set_speed(port, 9600);
-
- self->irlap = irlap_open(dev, &self->qos, DRIVER_NAME);
- if (!self->irlap) {
- err = -ENOMEM;
- goto err_irlap;
- }
-
- INIT_WORK(&self->work, bfin_sir_send_work);
-
- /*
- * Now enable the interrupt then start the queue
- */
- self->open = 1;
- bfin_sir_enable_rx(port);
-
- netif_start_queue(dev);
-
- return 0;
-
-err_irlap:
- self->open = 0;
- bfin_sir_shutdown(port, dev);
-err_startup:
- return err;
-}
-
-static int bfin_sir_stop(struct net_device *dev)
-{
- struct bfin_sir_self *self = netdev_priv(dev);
-
- flush_work(&self->work);
- bfin_sir_shutdown(self->sir_port, dev);
-
- if (self->rxskb) {
- dev_kfree_skb(self->rxskb);
- self->rxskb = NULL;
- }
-
- /* Stop IrLAP */
- if (self->irlap) {
- irlap_close(self->irlap);
- self->irlap = NULL;
- }
-
- netif_stop_queue(dev);
- self->open = 0;
-
- return 0;
-}
-
-static int bfin_sir_init_iobuf(iobuff_t *io, int size)
-{
- io->head = kmalloc(size, GFP_KERNEL);
- if (!io->head)
- return -ENOMEM;
- io->truesize = size;
- io->in_frame = FALSE;
- io->state = OUTSIDE_FRAME;
- io->data = io->head;
- return 0;
-}
-
-static const struct net_device_ops bfin_sir_ndo = {
- .ndo_open = bfin_sir_open,
- .ndo_stop = bfin_sir_stop,
- .ndo_start_xmit = bfin_sir_hard_xmit,
- .ndo_do_ioctl = bfin_sir_ioctl,
- .ndo_get_stats = bfin_sir_stats,
-};
-
-static int bfin_sir_probe(struct platform_device *pdev)
-{
- struct net_device *dev;
- struct bfin_sir_self *self;
- unsigned int baudrate_mask;
- struct bfin_sir_port *sir_port;
- int err;
-
- if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(per) && \
- per[pdev->id][3] == pdev->id) {
- err = peripheral_request_list(per[pdev->id], DRIVER_NAME);
- if (err)
- return err;
- } else {
- dev_err(&pdev->dev, "Invalid pdev id, please check board file\n");
- return -ENODEV;
- }
-
- err = -ENOMEM;
- sir_port = kmalloc(sizeof(*sir_port), GFP_KERNEL);
- if (!sir_port)
- goto err_mem_0;
-
- bfin_sir_init_ports(sir_port, pdev);
-
- dev = alloc_irdadev(sizeof(*self));
- if (!dev)
- goto err_mem_1;
-
- self = netdev_priv(dev);
- self->dev = &pdev->dev;
- self->sir_port = sir_port;
- sir_port->dev = dev;
-
- err = bfin_sir_init_iobuf(&self->rx_buff, IRDA_SKB_MAX_MTU);
- if (err)
- goto err_mem_2;
- err = bfin_sir_init_iobuf(&self->tx_buff, IRDA_SIR_MAX_FRAME);
- if (err)
- goto err_mem_3;
-
- dev->netdev_ops = &bfin_sir_ndo;
- dev->irq = sir_port->irq;
-
- irda_init_max_qos_capabilies(&self->qos);
-
- baudrate_mask = IR_9600;
-
- switch (max_rate) {
- case 115200:
- baudrate_mask |= IR_115200;
- case 57600:
- baudrate_mask |= IR_57600;
- case 38400:
- baudrate_mask |= IR_38400;
- case 19200:
- baudrate_mask |= IR_19200;
- case 9600:
- break;
- default:
- dev_warn(&pdev->dev, "Invalid maximum baud rate, using 9600\n");
- }
-
- self->qos.baud_rate.bits &= baudrate_mask;
-
- self->qos.min_turn_time.bits = 1; /* 10 ms or more */
-
- irda_qos_bits_to_value(&self->qos);
-
- err = register_netdev(dev);
-
- if (err) {
- kfree(self->tx_buff.head);
-err_mem_3:
- kfree(self->rx_buff.head);
-err_mem_2:
- free_netdev(dev);
-err_mem_1:
- kfree(sir_port);
-err_mem_0:
- peripheral_free_list(per[pdev->id]);
- } else
- platform_set_drvdata(pdev, sir_port);
-
- return err;
-}
-
-static int bfin_sir_remove(struct platform_device *pdev)
-{
- struct bfin_sir_port *sir_port;
- struct net_device *dev = NULL;
- struct bfin_sir_self *self;
-
- sir_port = platform_get_drvdata(pdev);
- if (!sir_port)
- return 0;
- dev = sir_port->dev;
- self = netdev_priv(dev);
- unregister_netdev(dev);
- kfree(self->tx_buff.head);
- kfree(self->rx_buff.head);
- free_netdev(dev);
- kfree(sir_port);
-
- return 0;
-}
-
-static struct platform_driver bfin_ir_driver = {
- .probe = bfin_sir_probe,
- .remove = bfin_sir_remove,
- .suspend = bfin_sir_suspend,
- .resume = bfin_sir_resume,
- .driver = {
- .name = DRIVER_NAME,
- },
-};
-
-module_platform_driver(bfin_ir_driver);
-
-module_param(max_rate, int, 0);
-MODULE_PARM_DESC(max_rate, "Maximum baud rate (115200, 57600, 38400, 19200, 9600)");
-
-MODULE_AUTHOR("Graf Yang <graf.yang@analog.com>");
-MODULE_DESCRIPTION("Blackfin IrDA driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/irda/drivers/bfin_sir.h b/drivers/staging/irda/drivers/bfin_sir.h
deleted file mode 100644
index d47cf14..0000000
--- a/drivers/staging/irda/drivers/bfin_sir.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-
-#include <linux/serial.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/wrapper.h>
-#include <net/irda/irda_device.h>
-
-#include <asm/irq.h>
-#include <asm/cacheflush.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-#undef DRIVER_NAME
-
-#ifdef CONFIG_SIR_BFIN_DMA
-struct dma_rx_buf {
- char *buf;
- int head;
- int tail;
-};
-#endif
-
-struct bfin_sir_port {
- unsigned char __iomem *membase;
- unsigned int irq;
- unsigned int lsr;
- unsigned long clk;
- struct net_device *dev;
-#ifdef CONFIG_SIR_BFIN_DMA
- int tx_done;
- struct dma_rx_buf rx_dma_buf;
- struct timer_list rx_dma_timer;
- int rx_dma_nrows;
-#endif
- unsigned int tx_dma_channel;
- unsigned int rx_dma_channel;
-};
-
-struct bfin_sir_port_res {
- unsigned long base_addr;
- int irq;
- unsigned int rx_dma_channel;
- unsigned int tx_dma_channel;
-};
-
-struct bfin_sir_self {
- struct bfin_sir_port *sir_port;
- spinlock_t lock;
- unsigned int open;
- int speed;
- int newspeed;
-
- struct sk_buff *txskb;
- struct sk_buff *rxskb;
- struct net_device_stats stats;
- struct device *dev;
- struct irlap_cb *irlap;
- struct qos_info qos;
-
- iobuff_t tx_buff;
- iobuff_t rx_buff;
-
- struct work_struct work;
- int mtt;
-};
-
-#define DRIVER_NAME "bfin_sir"
-
-#include <asm/bfin_serial.h>
-
-static const unsigned short per[][4] = {
- /* rx pin tx pin NULL uart_number */
- {P_UART0_RX, P_UART0_TX, 0, 0},
- {P_UART1_RX, P_UART1_TX, 0, 1},
- {P_UART2_RX, P_UART2_TX, 0, 2},
- {P_UART3_RX, P_UART3_TX, 0, 3},
-};
--
2.7.4
\
 
 \ /
  Last update: 2018-03-16 08:20    [W:0.179 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site