lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 0/2] add support for Socionext SynQuacer I2C controller
On 10 March 2018 at 15:01, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> On 2 March 2018 at 08:31, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
>> Add a binding and a driver for the I2C IP found in the Socionext SynQuacer
>> SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller.
>>
>> I think this is good to go now. Wolfram?
>>
>
> Ping?
>

Ping?

>> v5:
>> - add Rob's ack to #1
>> - drop unnecessary 'platform_set_drvdata(pdev, NULL)' in remove path (#2)
>>
>> v4:
>> - clarify binding that only a single interrupt specifier is expected (#1)
>> - check return value of clk_prepare_enable() on probe path (#2)
>> - add Andy's R-b to patch #2
>>
>> v3:
>> - incorporate more of Andy's review comments (#2), especially regarding the
>> bus speed and clock source handling for ACPI
>> - patch #1 unchanged.
>>
>> v2:
>> - incorporate Andy's review comments (#2)
>> - patch #1 unchanged.
>>
>> Ard Biesheuvel (2):
>> dt-bindings: i2c: add binding for Socionext SynQuacer I2C
>> i2c: add support for Socionext SynQuacer I2C controller
>>
>> Documentation/devicetree/bindings/i2c/i2c-synquacer.txt | 29 +
>> drivers/i2c/busses/Kconfig | 10 +
>> drivers/i2c/busses/Makefile | 1 +
>> drivers/i2c/busses/i2c-synquacer.c | 791 ++++++++++++++++++++
>> 4 files changed, 831 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
>> create mode 100644 drivers/i2c/busses/i2c-synquacer.c
>>
>> --
>> 2.11.0
>>

\
 
 \ /
  Last update: 2018-03-16 17:20    [W:0.079 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site