lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] reset: stm32mp1: Enable stm32mp1 reset driver
From
Date
Hi Gabriel,

this looks mostly good to me, a few questions and comments below:

On Wed, 2018-03-14 at 17:30 +0100, gabriel.fernandez@st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>
> stm32mp1 RCC IP 1 has a reset SET register and a reset CLEAR register.
>
> Writing '0' on reset SET register has no effect
> Writing '1' on reset SET register
> activates the reset of the corresponding peripheral
>
> Writing '0' on reset CLEAR register has no effect
> Writing '1' on reset CLEAR register
> releases the reset of the corresponding peripheral
>
> See Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
> drivers/reset/Kconfig | 6 ++
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-stm32mp1.c | 122 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 129 insertions(+)
> create mode 100644 drivers/reset/reset-stm32mp1.c
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 1efbc6c..c0b292b 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -97,6 +97,12 @@ config RESET_SIMPLE
> - Allwinner SoCs
> - ZTE's zx2967 family
>
> +config RESET_STM32MP157
> + bool "STM32MP157 Reset Driver" if COMPILE_TEST
> + default MACH_STM32MP157
> + help
> + This enables the RCC reset controller driver for STM32 MPUs.
> +
> config RESET_SUNXI
> bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
> default ARCH_SUNXI
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 132c24f..c1261dc 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_RESET_MESON) += reset-meson.o
> obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
> obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
> obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
> +obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
> obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
> obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
> diff --git a/drivers/reset/reset-stm32mp1.c b/drivers/reset/reset-stm32mp1.c
> new file mode 100644
> index 0000000..5e25388
> --- /dev/null
> +++ b/drivers/reset/reset-stm32mp1.c
> @@ -0,0 +1,122 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
> + * Author: Gabriel Fernandez <gabriel.fernandez@st.com> for STMicroelectronics.
> + */
> +
> +#include <linux/arm-smccc.h>

This does not seem to be necessary.

> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/of.h>

> +#include <linux/of_device.h>

This does not seem to be necessary either.

> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +
> +#define CLR_OFFSET 0x4
> +
> +struct stm32_reset_data {
> + struct reset_controller_dev rcdev;
> + void __iomem *membase;
> +};
> +
> +static inline struct stm32_reset_data *
> +to_stm32_reset_data(struct reset_controller_dev *rcdev)
> +{
> + return container_of(rcdev, struct stm32_reset_data, rcdev);
> +}
> +
> +static int stm32_reset_update(struct reset_controller_dev *rcdev,
> + unsigned long id, bool assert)
> +{
> + struct stm32_reset_data *data = to_stm32_reset_data(rcdev);
> + int reg_width = sizeof(u32);
> + int bank = id / (reg_width * BITS_PER_BYTE);
> + int offset = id % (reg_width * BITS_PER_BYTE);
> + void __iomem *addr;
> +
> + addr = data->membase + (bank * reg_width);
> + if (!assert)
> + addr += CLR_OFFSET;
> +
> + writel(BIT(offset), addr);
> +
> + return 0;
> +}
> +
> +static int stm32_reset_assert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + return stm32_reset_update(rcdev, id, true);
> +}
> +
> +static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + return stm32_reset_update(rcdev, id, false);
> +}
> +
> +static int stm32_reset_status(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct stm32_reset_data *data = to_stm32_reset_data(rcdev);
> + int reg_width = sizeof(u32);
> + int bank = id / (reg_width * BITS_PER_BYTE);
> + int offset = id % (reg_width * BITS_PER_BYTE);
> + u32 reg;
> +
> + reg = readl(data->membase + (bank * reg_width));
> +
> + return !(reg & BIT(offset));
> +}

So the SET register can be read back and returns 0 for reset lines that
are currently asserted and returns 1 for reset lines that are currently
deasserted?

> +
> +const struct reset_control_ops stm32_reset_ops = {
> + .assert = stm32_reset_assert,
> + .deassert = stm32_reset_deassert,
> + .status = stm32_reset_status,
> +};
> +
> +static const struct of_device_id stm32_reset_dt_ids[] = {
> + { .compatible = "st,stm32mp1-rcc"},
> + { /* sentinel */ },
> +};

From the DT bindings it looks like the clock and reset drivers are
sharing the same node. Is there just no clock platform_driver at all?

> +
> +static int stm32_reset_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct stm32_reset_data *data;
> + void __iomem *membase;
> + struct resource *res;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + membase = devm_ioremap_resource(dev, res);
> + if (IS_ERR(membase))
> + return PTR_ERR(membase);
> +
> + data->membase = membase;
> + data->rcdev.owner = THIS_MODULE;
> + data->rcdev.nr_resets = resource_size(res) * BITS_PER_BYTE;
> + data->rcdev.ops = &stm32_reset_ops;
> + data->rcdev.of_node = dev->of_node;
> +
> + return devm_reset_controller_register(dev, &data->rcdev);
> +}
> +
> +static struct platform_driver stm32_reset_driver = {
> + .probe = stm32_reset_probe,
> + .driver = {
> + .name = "stm32mp1-reset",
> + .of_match_table = stm32_reset_dt_ids,
> + },
> +};
> +
> +static int __init stm32_reset_init(void)
> +{
> + return platform_driver_register(&stm32_reset_driver);
> +}
> +
> +postcore_initcall(stm32_reset_init);

Isn't builtin_platform_driver early enough?

regards
Philipp

\
 
 \ /
  Last update: 2018-03-16 14:31    [W:0.121 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site