lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: dts: sun7i: Add pinmux settings for LCD0 RGB888 output.
From
Date
Hi,

Il 16/03/2018 10:39, Chen-Yu Tsai ha scritto:
> On Fri, Mar 16, 2018 at 5:19 PM, Giulio Benetti
> <giulio.benetti@micronovasrl.com> wrote:
>> Hi Maxime,
>>
>> Il 16/03/2018 07:47, Maxime Ripard ha scritto:
>>>
>>> Hi Giulio,
>>>
>>> On Thu, Mar 15, 2018 at 02:43:30PM +0100, Giulio Benetti wrote:
>>>>
>>>> The A20 supports RGB888 with H/V sync from LCD0. Add a pinmux setting
>>>> for the needed pins.
>>>>
>>>> Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
>>>
>>>
>>> Like we discussed last time, we only merge this kind of patches if
>>> there's an immediate user.
>>
>>
>> You're right.
>> In few time(I hope), I'm going to send dts for Linova1-4_3 and Linova1-7,
>> where I use those pins.
>> I have also to send 2 patches for 2 new panels for panel-simple.
>>
>> So I think I have to send 2 displays' patches before.
>> And a patchset for the 2 boards and rgb888 pins.
>>
>> One question: do I have to wait for panels' patches to applied and then send
>> patchset for boards dts?
>> Or can I send a unique patchset?
>> Because as I understand those patches should be applied to 2 different
>> repositories, right?
>
> If none of them have been merged yet, it's best to send all of them
> as part of the same series, and to all parties involved. That way,
> people have the full picture of what you're trying to achieve when
> they review your patches. Unless your series is really big.
>
> Maintainers will pick up patches that need to go through their trees.
> In general you don't need to do much coordination beyond pointing out
> whether the patches are safe to go in independently or there are
> dependencies that the maintainers need to be aware of.

Ok, now it's clear to me.
I've submitted only few patches till now,
so I didn't know about that.

Thank you very much

--
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

>
> ChenYu
>


\
 
 \ /
  Last update: 2018-03-16 14:11    [W:0.056 / U:1.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site