lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 02/13] ARM: dts: ipq4019: Add a few peripheral nodes
From
Date
Hi Marc,

On 3/16/2018 5:47 PM, Marc Zyngier wrote:
> On 16/03/18 09:38, Sricharan R wrote:
>> Now with the driver updates for some peripherals being there,
>> add i2c, spi, pcie, bam, qpic-nand, scm nodes to enhance the available
>> peripheral support.
>>
>> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
>> ---
>> arch/arm/boot/dts/qcom-ipq4019.dtsi | 134 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 134 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
>> index 10d112a..e38fffa 100644
>> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
>> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
>> @@ -25,7 +25,9 @@
>
> [...]
>
>> + pcie0: pci@40000000 {
>> + compatible = "qcom,pcie-ipq4019", "snps,dw-pcie";
>> + reg = <0x40000000 0xf1d
>> + 0x40000f20 0xa8
>> + 0x80000 0x2000
>> + 0x40100000 0x1000>;
>> + reg-names = "dbi", "elbi", "parf", "config";
>> + device_type = "pci";
>> + linux,pci-domain = <0>;
>> + bus-range = <0x00 0xff>;
>> + num-lanes = <1>;
>> + #address-cells = <3>;
>> + #size-cells = <2>;
>> +
>> + ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
>> + 0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
>> +
>> + interrupts = <GIC_SPI 141 IRQ_TYPE_NONE>;
>
> There is no such thing as IRQ_TYPE_NONE. Please replace this with the
> actual trigger information.

ok, will update this.

Regards,
Sricharan

--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2018-03-16 13:41    [W:0.094 / U:1.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site