lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 02/13] ARM: dts: ipq4019: Add a few peripheral nodes
From
Date
On 16/03/18 09:38, Sricharan R wrote:
> Now with the driver updates for some peripherals being there,
> add i2c, spi, pcie, bam, qpic-nand, scm nodes to enhance the available
> peripheral support.
>
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
> arch/arm/boot/dts/qcom-ipq4019.dtsi | 134 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 134 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> index 10d112a..e38fffa 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> @@ -25,7 +25,9 @@

[...]

> + pcie0: pci@40000000 {
> + compatible = "qcom,pcie-ipq4019", "snps,dw-pcie";
> + reg = <0x40000000 0xf1d
> + 0x40000f20 0xa8
> + 0x80000 0x2000
> + 0x40100000 0x1000>;
> + reg-names = "dbi", "elbi", "parf", "config";
> + device_type = "pci";
> + linux,pci-domain = <0>;
> + bus-range = <0x00 0xff>;
> + num-lanes = <1>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
> + 0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
> +
> + interrupts = <GIC_SPI 141 IRQ_TYPE_NONE>;

There is no such thing as IRQ_TYPE_NONE. Please replace this with the
actual trigger information.

Thanks,

M.
--
Jazz is not dead. It just smells funny...

\
 
 \ /
  Last update: 2018-03-16 13:18    [W:0.172 / U:1.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site