lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 13/13] ARM: dts: ipq8074: Enable few peripherals for hk01 board
On 2018-03-16 15:08, Sricharan R wrote:
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103
> ++++++++++++++++++++++++++++++
> 1 file changed, 103 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> index 6a838b5..81dff867 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> @@ -21,6 +21,7 @@
>
> aliases {
> serial0 = &blsp1_uart5;
> + serial1 = &serial_blsp2;
> };
>
> chosen {
> @@ -41,6 +42,47 @@
> bias-disable;
> };
> };
> +
> + i2c_0_pins: i2c_0_pinmux {
> + mux {
> + pins = "gpio42", "gpio43";
> + function = "blsp1_i2c";
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> +
> + spi_0_pins: spi_0_pins {
> + mux {
> + pins = "gpio38", "gpio39", "gpio40", "gpio41";
> + function = "blsp0_spi";
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> +
> + hsuart_pins: hsuart_pins {
> + mux {
> + pins = "gpio46", "gpio47", "gpio48", "gpio49";
> + function = "blsp2_uart";
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> +
> + qpic_pins: qpic_pins {
> + mux {
> + pins = "gpio1", "gpio3", "gpio4",
> + "gpio5", "gpio6", "gpio7",
> + "gpio8", "gpio10", "gpio11",
> + "gpio12", "gpio13", "gpio14",
> + "gpio15", "gpio16", "gpio17";
> + function = "qpic";
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> +
> };
>
> serial@78b3000 {
> @@ -48,5 +90,66 @@
> pinctrl-names = "default";
> status = "ok";
> };
> +
> + spi@78b5000 {
> + pinctrl-0 = <&spi_0_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> +
> + m25p80@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "n25q128a11", "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <50000000>;
> + };
> + };
> +
> + serial@78B1000 {

s/78B1000/78b1000

With that,
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>

> + pinctrl-0 = <&hsuart_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> +
> + i2c_0@78b6000 {
> + pinctrl-0 = <&i2c_0_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> +
> + dma@7984000 {
> + status = "ok";
> + };
> +
> + nand@79b0000 {
> + pinctrl-0 = <&qpic_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> +
> + nand@0 {
> + reg = <0>;
> + nand-ecc-strength = <4>;
> + nand-ecc-step-size = <512>;
> + nand-bus-width = <8>;
> + };
> + };
> +
> + phy@86000 {
> + status = "ok";
> + };
> +
> + phy@8e000 {
> + status = "ok";
> + };
> +
> + pci@20000000 {
> + status = "ok";
> + perst-gpio = <&tlmm 58 0x1>;
> + };
> +
> + pci@10000000 {
> + status = "ok";
> + perst-gpio = <&tlmm 61 0x1>;
> + };
> };
> };

\
 
 \ /
  Last update: 2018-03-16 11:58    [W:0.136 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site