lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 08/13] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
On 2018-03-16 15:08, Sricharan R wrote:
> Add the common data for all dk07 based boards.
>
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>

Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>

> ---
> arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 83
> +++++++++++++++++++++++++++
> 1 file changed, 83 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
>
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
> new file mode 100644
> index 0000000..37a2ea8
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
> @@ -0,0 +1,83 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> +
> +#include "qcom-ipq4019.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
> + compatible = "qcom,ipq4019";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x20000000>; /* 512MB */
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + rsvd1@87000000 {
> + /* Reserved for other subsystem */
> + reg = <0x87000000 0x500000>;
> + no-map;
> + };
> +
> + wifi_dump@87500000 {
> + reg = <0x87500000 0x600000>;
> + no-map;
> + };
> +
> + rsvd2@87B00000 {
> + /* Reserved for other subsystem */
> + reg = <0x87B00000 0x500000>;
> + no-map;
> + };
> + };
> +
> + soc {
> + pinctrl@1000000 {
> + serial_0_pins: serial0_pinmux {
> + mux {
> + pins = "gpio16", "gpio17";
> + function = "blsp_uart0";
> + bias-disable;
> + };
> + };
> +
> + i2c_0_pins: i2c_0_pinmux {
> + mux {
> + pins = "gpio20", "gpio21";
> + function = "blsp_i2c0";
> + bias-disable;
> + };
> + };
> + };
> +
> + serial@78af000 {
> + pinctrl-0 = <&serial_0_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> +
> + blsp_dma: dma@7884000 {
> + status = "ok";
> + };
> +
> + i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
> + pinctrl-0 = <&i2c_0_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> +
> + qpic_bam: dma@7984000 {
> + status = "ok";
> + };
> +
> + nand: qpic-nand@79b0000 {
> + status = "ok";
> + };
> + };
> +};

\
 
 \ /
  Last update: 2018-03-16 11:23    [W:0.180 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site