lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/7] arm64: dts: msm8996: Add rpmpd device node
On 16-03-18, 09:38, Rajendra Nayak wrote:
> Add rpmpd device node and its OPP table
>
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 46 +++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 0a6f7952bbb1..43757a078146 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -297,6 +297,52 @@
> #clock-cells = <1>;
> };
>
> + rpmpd: qcom,rpmpd {
> + compatible = "qcom,rpmpd-msm8996";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmpd_opp_table>, /* cx */
> + <&rpmpd_opp_table>, /* cx_ao */
> + <&rpmpd_opp_table>, /* cx_vfc */
> + <&rpmpd_opp_table>, /* mx */
> + <&rpmpd_opp_table>, /* mx_ao */
> + <&rpmpd_opp_table>, /* sscx */
> + <&rpmpd_opp_table>; /* sscx_vfc */
> + };
> +
> + rpmpd_opp_table: opp-table {
> + compatible = "operating-points-v2", "operating-points-v2-qcom";
> +
> + rpmpd_opp1: opp@1 {
> + opp-hz = /bits/ 64 <1>;

Actually this (magic values) isn't allowed right now. I will send a
patchset to make this property optional later on separately (once the
other series is accepted).

> + qcom,level = <1>;
> + };
> +
> + rpmpd_opp2: opp@2 {
> + opp-hz = /bits/ 64 <2>;
> + qcom,level = <2>;
> + };
> +
> + rpmpd_opp3: opp@3 {
> + opp-hz = /bits/ 64 <3>;
> + qcom,level = <3>;
> + };
> +
> + rpmpd_opp4: opp@4 {
> + opp-hz = /bits/ 64 <4>;
> + qcom,level = <4>;
> + };
> +
> + rpmpd_opp5: opp@5 {
> + opp-hz = /bits/ 64 <5>;
> + qcom,level = <5>;
> + };
> +
> + rpmpd_opp6: opp@6 {
> + opp-hz = /bits/ 64 <6>;
> + qcom,level = <6>;
> + };
> + };
> +
> pm8994-regulators {
> compatible = "qcom,rpm-pm8994-regulators";
>

Everything else is fine. After you remove the opp-hz property from
this table:

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

--
viresh

\
 
 \ /
  Last update: 2018-03-16 05:38    [W:0.200 / U:4.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site