lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: linux-next: build failure after merge of the asm-generic tree
On Thu, Mar 15, 2018 at 11:47 PM, Bin Liu <b-liu@ti.com> wrote:
> Hi,
>
> On Fri, Mar 16, 2018 at 09:13:55AM +1100, Stephen Rothwell wrote:
>> Hi Arnd,
>>
>> After merging the asm-generic tree, today's linux-next build (arm
>> multi_v7_defconfig) failed like this:
>>
>> drivers/usb/musb/musb_host.c: In function 'musb_rx_reinit':
>> drivers/usb/musb/musb_host.c:577:10: error: 'struct musb' has no member named 'double_buffer_not_ok'
>> if (musb->double_buffer_not_ok)
>> ^~
>> drivers/usb/musb/musb_host.c: In function 'musb_ep_program':
>> drivers/usb/musb/musb_host.c:807:12: error: 'struct musb' has no member named 'double_buffer_not_ok'
>> if (musb->double_buffer_not_ok) {
>> ^~
>>
>> Caused by commit
>>
>> 8312c0cad792 ("usb: musb: remove blackfin port")

Sorry about that, I should have done more testing after updating the patch.
Aaron sent a second version of the blackfin removal, and after comparing
his version with mine, I picked up a couple of extra hunks that I folded
into my patch series, including the two musb bits below.

> I don't have a clone of the asm-generic tree to check, but this patch
> Arnd sent yesterday for review doesn't remove double_buffer_not_ok from
> struct musb. Is it removed when Arnd you were revising it based on my
> review comments? Anyway, it is better to remove it too since this flag
> is Blackfin specific, but is it possible to combine this fixup patch with the
> original patch to avoid bisect headache in the future?

Sure, doing that now.

Arnd

8<---

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 011c8ca7de42..13486588e561 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2166,7 +2166,7 @@ musb_init_controller(struct device *dev, int
nIrq, void __iomem *ctrl)
* - initializes musb->xceiv, usually by otg_get_phy()
* - stops powering VBUS
*
- * There are various transceiver configurations. Blackfin,
+ * There are various transceiver configurations.
* DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
* external/discrete ones in various flavors (twl4030 family,
* isp1504, non-OTG, etc) mostly hooking up through ULPI.
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index ac675b1a34c4..8a74cb2907f8 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -414,19 +414,6 @@ struct musb {
struct usb_gadget_driver *gadget_driver; /* its driver */
struct usb_hcd *hcd; /* the usb hcd */

- /*
- * FIXME: Remove this flag.
- *
- * This is only added to allow Blackfin to work
- * with current driver. For some unknown reason
- * Blackfin doesn't work with double buffering
- * and that's enabled by default.
- *
- * We added this flag to forcefully disable double
- * buffering until we get it working.
- */
- unsigned double_buffer_not_ok:1;
-
const struct musb_hdrc_config *config;

int xceiv_old_state;
\
 
 \ /
  Last update: 2018-03-16 09:08    [W:0.025 / U:3.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site