lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 2/2] hwmon: (ucd9000) Add debugfs attributes to provide mfr_status
From
Date


On 03/16/2018 02:59 PM, Guenter Roeck wrote:
> On Fri, Mar 16, 2018 at 02:25:59PM -0500, Eddie James wrote:
>> From: Christopher Bostic <cbostic@linux.vnet.ibm.com>
>>
>> Expose the gpiN_fault fields of mfr_status as individual debugfs
>> attributes. This provides a way for users to be easily notified of gpi
>> faults. Also provide the whole mfr_status register in debugfs.
>>
>> Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
>> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
>> Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
>> ---
>> drivers/hwmon/pmbus/ucd9000.c | 138 +++++++++++++++++++++++++++++++++++++++++-
>> 1 file changed, 137 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c
>> index ef2c5bf..88c98fb 100644
>> --- a/drivers/hwmon/pmbus/ucd9000.c
>> +++ b/drivers/hwmon/pmbus/ucd9000.c
>> @@ -19,6 +19,7 @@
>> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>> */
>>
>> +#include <linux/debugfs.h>
>> #include <linux/kernel.h>
>> #include <linux/module.h>
>> #include <linux/of_device.h>
>> @@ -37,6 +38,7 @@
>> #define UCD9000_NUM_PAGES 0xd6
>> #define UCD9000_FAN_CONFIG_INDEX 0xe7
>> #define UCD9000_FAN_CONFIG 0xe8
>> +#define UCD9000_MFR_STATUS 0xf3
>> #define UCD9000_GPIO_SELECT 0xfa
>> #define UCD9000_GPIO_CONFIG 0xfb
>> #define UCD9000_DEVICE_ID 0xfd
>> @@ -64,15 +66,24 @@
>> #define UCD901XX_NUM_GPIOS 26
>> #define UCD90910_NUM_GPIOS 26
>>
>> +#define UCD9000_DEBUGFS_NAME_LEN 24
>> +#define UCD9000_GPI_COUNT 8
>> +
>> struct ucd9000_data {
>> u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
>> struct pmbus_driver_info info;
>> #ifdef CONFIG_GPIOLIB
>> struct gpio_chip gpio;
>> #endif
>> + struct dentry *debugfs;
>> };
>> #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info)
>>
>> +struct ucd9000_debugfs_entry {
>> + struct i2c_client *client;
>> + u8 index;
>> +};
>> +
>> static int ucd9000_get_fan_config(struct i2c_client *client, int fan)
>> {
>> int fan_config = 0;
>> @@ -359,6 +370,122 @@ static void ucd9000_probe_gpio(struct i2c_client *client,
>> }
>> #endif /* CONFIG_GPIOLIB */
>>
>> +#ifdef CONFIG_DEBUG_FS
>> +static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer)
>> +{
>> + int ret = pmbus_set_page(client, 0);
>> +
>> + if (ret < 0)
>> + return ret;
>> +
>> + return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer);
>> +}
>> +
>> +static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val)
>> +{
>> + struct ucd9000_debugfs_entry *entry = data;
>> + struct i2c_client *client = entry->client;
>> + u8 buffer[I2C_SMBUS_BLOCK_MAX];
>> + int ret;
>> +
>> + ret = ucd9000_get_mfr_status(client, buffer);
>> + if (ret < 0)
>> + return ret;
>> +
>> + /*
>> + * Attribute only created for devices with gpi fault bits at bits
>> + * 16-23, which is the second byte of the response.
>> + */
>> + *val = !!(buffer[1] & BIT(entry->index));
>> +
>> + return 0;
>> +}
>> +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit,
>> + ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n");
>> +
>> +static ssize_t ucd9000_debugfs_read_mfr_status(struct file *file,
>> + char __user *buf, size_t count,
>> + loff_t *ppos)
>> +{
>> + struct i2c_client *client = file->private_data;
>> + u8 buffer[I2C_SMBUS_BLOCK_MAX];
>> + char str[(I2C_SMBUS_BLOCK_MAX * 2) + 2];
>> + char *res;
>> + int rc;
>> +
>> + rc = ucd9000_get_mfr_status(client, buffer);
>> + if (rc < 0)
>> + return rc;
>> +
>> + res = bin2hex(str, buffer, min(rc, I2C_SMBUS_BLOCK_MAX));
>> + *res++ = '\n';
>> + *res++ = 0;
>> +
> Unless I am missing something, this now returns the terminating '\0'
> to the user. Is this really what you want ?

Yes, that was my intention. I thought that was normal. It worked fine
when I cat'ed the file. Up to you, I can change it if you like.

Thanks,
Eddie

>
> I see other code adding the terminator, but it doesn't usually return it
> to the user.
>
> Guenter
>
>> + return simple_read_from_buffer(buf, count, ppos, str, res - str);
>> +}
>> +
>> +static const struct file_operations ucd9000_debugfs_show_mfr_status_fops = {
>> + .llseek = noop_llseek,
>> + .read = ucd9000_debugfs_read_mfr_status,
>> + .open = simple_open,
>> +};
>> +
>> +static int ucd9000_init_debugfs(struct i2c_client *client,
>> + const struct i2c_device_id *mid,
>> + struct ucd9000_data *data)
>> +{
>> + struct dentry *debugfs;
>> + struct ucd9000_debugfs_entry *entries;
>> + int i;
>> + char name[UCD9000_DEBUGFS_NAME_LEN];
>> +
>> + debugfs = pmbus_get_debugfs_dir(client);
>> + if (!debugfs)
>> + return -ENOENT;
>> +
>> + data->debugfs = debugfs_create_dir(client->name, debugfs);
>> + if (!data->debugfs)
>> + return -ENOENT;
>> +
>> + /*
>> + * Of the chips this driver supports, only the UCD9090, UCD90160,
>> + * and UCD90910 report GPI faults in their MFR_STATUS register, so only
>> + * create the GPI fault debugfs attributes for those chips.
>> + */
>> + if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 ||
>> + mid->driver_data == ucd90910) {
>> + entries = devm_kzalloc(&client->dev,
>> + sizeof(*entries) * UCD9000_GPI_COUNT,
>> + GFP_KERNEL);
>> + if (!entries)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < UCD9000_GPI_COUNT; i++) {
>> + entries[i].client = client;
>> + entries[i].index = i;
>> + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN,
>> + "gpi%d_alarm", i + 1);
>> + debugfs_create_file(name, 0444, data->debugfs,
>> + &entries[i],
>> + &ucd9000_debugfs_mfr_status_bit);
>> + }
>> + }
>> +
>> + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, "mfr_status");
>> + debugfs_create_file(name, 0444, data->debugfs, client,
>> + &ucd9000_debugfs_show_mfr_status_fops);
>> +
>> + return 0;
>> +}
>> +#else
>> +static int ucd9000_init_debugfs(struct i2c_client *client,
>> + const struct i2c_device_id *mid,
>> + struct ucd9000_data *data)
>> +{
>> + return 0;
>> +}
>> +#endif /* CONFIG_DEBUG_FS */
>> +
>> static int ucd9000_probe(struct i2c_client *client,
>> const struct i2c_device_id *id)
>> {
>> @@ -475,7 +602,16 @@ static int ucd9000_probe(struct i2c_client *client,
>>
>> ucd9000_probe_gpio(client, mid, data);
>>
>> - return pmbus_do_probe(client, mid, info);
>> + ret = pmbus_do_probe(client, mid, info);
>> + if (ret)
>> + return ret;
>> +
>> + ret = ucd9000_init_debugfs(client, mid, data);
>> + if (ret)
>> + dev_warn(&client->dev, "Failed to register debugfs: %d\n",
>> + ret);
>> +
>> + return 0;
>> }
>>
>> /* This is the driver that will be inserted */
>> --
>> 1.8.3.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2018-03-16 21:05    [W:0.084 / U:5.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site