lkml.org 
[lkml]   [2018]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/2] dt-bindings: power: Add ZynqMP power domain bindings
Date
Hi Rob, Geert, Marek,

> -----Original Message-----
> From: Marek Szyprowski [mailto:m.szyprowski@samsung.com]
> Sent: Tuesday, March 06, 2018 12:06 AM
> To: Geert Uytterhoeven <geert@linux-m68k.org>; Rob Herring
> <robh@kernel.org>
> Cc: Jolly Shah <JOLLYS@xilinx.com>; Matthias Brugger
> <matthias.bgg@gmail.com>; Andy Gross <andy.gross@linaro.org>; Shawn Guo
> <shawnguo@kernel.org>; Geert Uytterhoeven <geert+renesas@glider.be>;
> Björn Andersson <bjorn.andersson@linaro.org>; sean.wang@mediatek.com;
> Michal Simek <michal.simek@xilinx.com>; Mark Rutland
> <mark.rutland@arm.com>; Rajan Vaja <RAJANV@xilinx.com>; open list:OPEN
> FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
> <devicetree@vger.kernel.org>; Linux ARM <linux-arm-
> kernel@lists.infradead.org>; Linux Kernel Mailing List <linux-
> kernel@vger.kernel.org>; Jolly Shah <JOLLYS@xilinx.com>
> Subject: Re: [PATCH 1/2] dt-bindings: power: Add ZynqMP power domain
> bindings
>
> Hi All,
>
> On 2018-03-06 08:59, Geert Uytterhoeven wrote:
> > Hi Rob, Jolly,
> >
> > On Mon, Mar 5, 2018 at 11:39 PM, Rob Herring <robh@kernel.org> wrote:
> >> On Tue, Feb 27, 2018 at 03:55:49PM -0800, Jolly Shah wrote:
> >>> Add documentation to describe ZynqMP power domain bindings.
> >>>
> >>> Signed-off-by: Jolly Shah <jollys@xilinx.com>
> >>> Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
> >>> ---
> >>> .../devicetree/bindings/power/zynqmp-genpd.txt | 46
> ++++++++++++++++++++++
> >>> 1 file changed, 46 insertions(+)
> >>> create mode 100644
> >>> Documentation/devicetree/bindings/power/zynqmp-genpd.txt
> >>>
> >>> diff --git
> >>> a/Documentation/devicetree/bindings/power/zynqmp-genpd.txt
> >>> b/Documentation/devicetree/bindings/power/zynqmp-genpd.txt
> >>> new file mode 100644
> >>> index 0000000..25f9711
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/power/zynqmp-genpd.txt
> >>> +This node contains a number of subnodes, each representing a single
> >>> +PM domain that PM domain consumer devices reference.
> >>> +
> >>> +== PM Domain Nodes ==
> >>> +
> >>> +Required properties:
> >>> + - #power-domain-cells: Number of cells in a PM domain specifier. Must be
> 0.
> >>> + - pd-id: List of domain identifiers of as defined by platform firmware.
> These
> >>> + identifiers are passed to the PM firmware.
> >>> +
> >>> +Example:
> >>> + zynqmp-genpd {
> >>> + compatible = "xlnx,zynqmp-genpd";
> >> What's the control interface for controlling the domains?
> >>> +
> >>> + pd_usb0: pd-usb0 {
> >>> + pd-id = <22>;
> >>> + #power-domain-cells = <0>;
> >> There's no need for all these sub nodes. Make #power-domain-cells 1
> >> and put the id in the cell value.
> > That was my first reaction, too...
> >>> + };
> >>> +
> >>> + pd_sata: pd-sata {
> >>> + pd-id = <28>;
> >>> + #power-domain-cells = <0>;
> >>> + };
> >>> +
> >>> + pd_gpu: pd-gpu {
> >>> + pd-id = <58 20 21>;
> > ... until I saw the above.
> > Controlling the GPU power area requires controlling 3 physical areas?
> >
> > However, doing it this way may bite you in the future, if a need
> > arises to control a subset. And what about power up/down order?
>
> What about defining 3 separate domains and arranging them in parent-child
> relationship? generic power domains already supports that and this allows to
> nicely define the power on/off order.
>
> >>> + #power-domain-cells = <0x0>;
> >>> + };
> >>> + };
>

I agree it should be arranged in as parent child order to control subset or control order. Will incorporate those changes in next version.

> Best regards
> --
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland

\
 
 \ /
  Last update: 2018-03-15 18:48    [W:0.088 / U:2.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site