lkml.org 
[lkml]   [2018]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] phy: phy-mtk-tphy: add configurable parameters for slew rate calibrate
Date
There are two parameters, ref_clk and coefficient, for U2 slew rate
calibrate which may vary on different SoCs, here allow them to be
configurable

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/phy/mediatek/phy-mtk-tphy.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 6073c25..38c281b 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -306,6 +306,8 @@ struct mtk_tphy {
const struct mtk_phy_pdata *pdata;
struct mtk_phy_instance **phys;
int nphys;
+ int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
+ int src_coef; /* coefficient for slew rate calibrate */
};

static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
@@ -360,16 +362,17 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
writel(tmp, fmreg + U3P_U2FREQ_FMMONR1);

if (fm_out) {
- /* ( 1024 / FM_OUT ) x reference clock frequency x 0.028 */
- tmp = U3P_FM_DET_CYCLE_CNT * U3P_REF_CLK * U3P_SLEW_RATE_COEF;
- tmp /= fm_out;
+ /* ( 1024 / FM_OUT ) x reference clock frequency x coef */
+ tmp = tphy->src_ref_clk * tphy->src_coef;
+ tmp = (tmp * U3P_FM_DET_CYCLE_CNT) / fm_out;
calibration_val = DIV_ROUND_CLOSEST(tmp, U3P_SR_COEF_DIVISOR);
} else {
/* if FM detection fail, set default value */
calibration_val = 4;
}
- dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d\n",
- instance->index, fm_out, calibration_val);
+ dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d (clk:%d, coef:%d)\n",
+ instance->index, fm_out, calibration_val,
+ tphy->src_ref_clk, tphy->src_coef);

/* set HS slew rate */
tmp = readl(com + U3P_USBPHYACR5);
@@ -1041,6 +1044,13 @@ static int mtk_tphy_probe(struct platform_device *pdev)
tphy->u3phya_ref = NULL;
}

+ tphy->src_ref_clk = U3P_REF_CLK;
+ tphy->src_coef = U3P_SLEW_RATE_COEF;
+ /* update parameters of slew rate calibrate if exist */
+ device_property_read_u32(dev, "mediatek,src-ref-clk-mhz",
+ &tphy->src_ref_clk);
+ device_property_read_u32(dev, "mediatek,src-coef", &tphy->src_coef);
+
port = 0;
for_each_child_of_node(np, child_np) {
struct mtk_phy_instance *instance;
--
1.9.1
\
 
 \ /
  Last update: 2018-03-12 04:41    [W:0.043 / U:15.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site