lkml.org 
[lkml]   [2018]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 00/10] R-Car M3-N: Enable EtherAVB device node
On Tue, Feb 27, 2018 at 11:22:44AM +0100, Jacopo Mondi wrote:
> Hi Simon, Geert,
> in this second iteration I have dropped iommu dependencies for EtherAVB
> and have changed "phy-mode" for all mainlines Gen-3 boards, this time including
> ULCB, Draak, Eagle and V3MSK.
>
> The series add phy-mode as a board property to the following board files:
> - salvator-common.dtsi
> - ulcb.dtsi
> - r8a77995-draak.dts
> - r8a77970-eagle.dts
> - r8a77970-v3msk.dts
>
> And reset the EtherAVB phy-mode to "rgmii" in the following SoC DTSI:
> - r8a7795.dtsi
> - r8a7796.dtsi
> - r8a77995.dtsi
> - r8a77970.dtsi
>
> And finally, I added EtherAVB device node for M3-N on top.

Thanks for the test report, applied.

\
 
 \ /
  Last update: 2018-03-01 10:53    [W:0.077 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site