[lkml]   [2018]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/2] irqchip: qcom: add support for PDC interrupt controller
Changes since v3:
- Code clean up as suggested by Marc

On newer Qualcomm Techonologies Inc's SoCs like the SDM845, the GIC is in a
power domain that can be powered off when not needed. Interrupts that need to
be sensed even when the GIC is powered off, are routed through an interrupt
controller in an always-on domain called the Power Domain Controller a.k.a PDC.
This series adds support for the PDC's interrupt controller.

Please consider reviewing these patches.

RFC v1:
RFC v2:

Lina Iyer (2):
drivers: irqchip: pdc: Add PDC interrupt controller for QCOM SoCs
dt-bindings/interrupt-controller: pdc: descibe PDC device binding

.../bindings/interrupt-controller/qcom,pdc.txt | 80 ++++++
drivers/irqchip/Kconfig | 9 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/qcom-pdc.c | 311 +++++++++++++++++++++
4 files changed, 401 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
create mode 100644 drivers/irqchip/qcom-pdc.c

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

 \ /
  Last update: 2018-02-07 16:50    [W:0.061 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site