[lkml]   [2018]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 3/6] gpio: Add GPIO driver for Nintendo Wii
On Mon, Jan 22, 2018 at 6:04 AM, Jonathan Neuschäfer
<> wrote:

> The Nintendo Wii's chipset (called "Hollywood") has a GPIO controller
> that supports a configurable number of pins (up to 32), interrupts, and
> some special mechanisms to share the controller between the system's
> security processor (an ARM926) and the PowerPC CPU. Pin multiplexing is
> not supported.
> This patch adds a basic driver for this GPIO controller. Interrupt
> support will come in a later patch.
> This patch is based on code developed by Albert Herranz and the GameCube
> Linux Team, file arch/powerpc/platforms/embedded6xx/hlwd-gpio.c,
> available at, but
> has grown quite dissimilar.
> Signed-off-by: Jonathan Neuschäfer <>
> Cc: Albert Herranz <>
> Cc: Segher Boessenkool <>
> ---
> v2:

All looks very good to me, Andy had some additional comments,
once addressed in v3 I will apply this.

You only need to resend this patch as I already applied the DT

Linus Walleij

 \ /
  Last update: 2018-02-07 13:30    [W:0.088 / U:2.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site