[lkml]   [2018]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v6 15/15] dt-bindings: cpufreq: Document operating-points-v2-krait-cpu
On 06-02-18, 09:38, Sricharan R wrote:
> In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
> that has KRAIT processors the voltage/current value of each OPP
> varies based on the silicon variant in use.
> operating-points-v2-krait-cpu specifies the phandle to nvmem efuse cells
> and the operating-points-v2 table for each opp. The qcom-cpufreq driver
> reads the efuse value from the SoC to provide the required information
> that is used to determine the voltage and current value for each OPP of
> operating-points-v2 table when it is parsed by the OPP framework.
> Signed-off-by: Sricharan R <>
> ---
> .../devicetree/bindings/cpufreq/krait-cpufreq.txt | 363 +++++++++++++++++++++
> 1 file changed, 363 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/cpufreq/krait-cpufreq.txt

You can add my Ack if Rob also finds everything to be fine here.

Acked-by: Viresh Kumar <>


 \ /
  Last update: 2018-02-06 05:28    [W:0.117 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site