lkml.org 
[lkml]   [2018]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/15] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
On 2018-01-29 10:41, Sricharan R wrote:
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts | 14 ++++++++++++++
> 2 files changed, 15 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 68e4b15..0104ba2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -727,6 +727,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> qcom-ipq4019-ap.dk01.1-c2.dtb \
> qcom-ipq4019-ap.dk04.1-c1.dtb \
> qcom-ipq4019-ap.dk04.1-c5.dtb \
> + qcom-ipq4019-ap.dk04.1-c3.dtb \
> qcom-ipq8064-ap148.dtb \
> qcom-msm8660-surf.dtb \
> qcom-msm8960-cdp.dtb \
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
> new file mode 100644
> index 0000000..7a93fc4
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2017, The Linux Foundation. All rights reserved.
> +
> +#include "qcom-ipq4019-ap.dk04.1.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
> +
> + soc {
> + nand: qpic-nand@79b0000 {
> + status = "disabled";
> + };

Normally we need to disable in base dtsi and enable in
board dtsi so that base dtsi will always work in all the
boards. Now If We load the base dtsi in any DK04 board
other than C1, then nand failure will come.

Thanks,
Abhishek

\
 
 \ /
  Last update: 2018-02-03 12:38    [W:0.072 / U:13.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site