lkml.org 
[lkml]   [2018]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 14/15] cpufreq: Add module to register cpufreq on Krait CPUs
From
Date
Hi Gregory,

On 2/27/2018 8:28 PM, Gregory CLEMENT wrote:
> Hi Sricharan,
>
> On mar., févr. 27 2018, Sricharan R <sricharan@codeaurora.org> wrote:
>
>> From: Stephen Boyd <sboyd@codeaurora.org>
>>
>> Register a cpufreq-generic device whenever we detect that a
>> "qcom,krait" compatible CPU is present in DT.
>>
>> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
>> [Sricharan: updated to use dev_pm_opp_set_prop_name and
>> nvmem apis]
>> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
>> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
>> ---
>> drivers/cpufreq/Kconfig.arm | 10 ++
>> drivers/cpufreq/Makefile | 3 +
>> drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
>> drivers/cpufreq/qcom-cpufreq.c | 183 +++++++++++++++++++++++++++++++++++
>> 4 files changed, 201 insertions(+)
>> create mode 100644 drivers/cpufreq/qcom-cpufreq.c
>>
>> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
>> index 3a88e33..826f9e7 100644
>> --- a/drivers/cpufreq/Kconfig.arm
>> +++ b/drivers/cpufreq/Kconfig.arm
>> @@ -133,6 +133,16 @@ config ARM_OMAP2PLUS_CPUFREQ
>> depends on ARCH_OMAP2PLUS
>> default ARCH_OMAP2PLUS
>>
>> +config ARM_QCOM_CPUFREQ
>> + bool "CPUfreq driver for the QCOM SoCs with KRAIT processors"
>> + depends on ARCH_QCOM
>> + select PM_OPP
>> + help
>> + This enables the CPUFreq driver for Qualcomm SoCs with
>> + KRAIT processors.
>> +
>> + If in doubt, say N.
>> +
>> config ARM_S3C_CPUFREQ
>> bool
>> help
>> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
>> index c60c1e1..21894f6 100644
>> --- a/drivers/cpufreq/Makefile
>> +++ b/drivers/cpufreq/Makefile
>> @@ -65,6 +65,9 @@ obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
>> obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
>> obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
>> obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
>> +obj-$(CONFIG_ARM_QCOM_CPUFREQ) += qcom-cpufreq.o
>
> These 2 following lines don't seem related to the commit log:
>> +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
>> +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
>

oops. Will remove. Rebase mistake. Thanks.

Regards,
Sricharan--

"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2018-02-28 06:35    [W:0.090 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site