lkml.org 
[lkml]   [2018]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] PCI/AER: update AER status string print to match other AER logs
On Wed, Feb 07, 2018 at 03:11:25PM -0500, Tyler Baicar wrote:
> Currently the AER driver uses cper_print_bits() to print the AER status
> string. This causes the status string to not include the proper PCI device
> name prefix that the other AER prints include. Also, it has a different
> print level than all the other AER prints, and there is a potential to
> have multiple status prints based on string lengths.
>
> Update the AER driver to print the AER status string with the proper string
> prefix and proper print level, and abreviate the status strings similar to
> lspci -vv prints so they can be printed on the same line.
>
> Previous log example:
>
> e1000e 0003:01:00.1: aer_status: 0x00000041, aer_mask: 0x00000000
> Receiver Error, Bad TLP
> e1000e 0003:01:00.1: aer_layer=Physical Layer, aer_agent=Receiver ID
> pcieport 0003:00:00.0: aer_status: 0x00001000, aer_mask: 0x0000e000
> Replay Timer Timeout
> pcieport 0003:00:00.0: aer_layer=Data Link Layer, aer_agent=Transmitter ID
>
> New log:
>
> e1000e 0003:01:00.1: aer_status: 0x00000041, aer_mask: 0x00000000
> e1000e 0003:01:00.1: RxErr, BadTLP
> e1000e 0003:01:00.1: aer_layer=Physical Layer, aer_agent=Receiver ID
> pcieport 0003:00:00.0: aer_status: 0x00001000, aer_mask: 0x0000e000
> pcieport 0003:00:00.0: Timeout
> pcieport 0003:00:00.0: aer_layer=Data Link Layer, aer_agent=Transmitter ID

This is awesome, much better than before.

But it only changes the output via the APEI/GHES path. I think errors
reported via the "native" path, i.e., aer_print_error(), should look
the same. Since this patch changes the way cper_print_aer() decodes
the status bits, can you make the aer_print_error() status bit
decoding match it?

Both paths (cper_print_aer() and aer_print_error()) also print the
raw "status" and "mask" values. But these can be from either the
Uncorrectable Error registers or the Correctable Errors registers.
I don't think cper_print_aer() prints any clue about which is the
source. Can you include something like what aer_print_error() does,
e.g., with aer_error_severity_string[]?

I would suggest splitting this into a few patches:

- abbreviate the *_error_string[] values
- change cper_print_aer() to use dev_print_bits() instead of
cper_print_bits()
- change cper_print_aer() to print severity/type/id in the same
format aer_print_error() uses
- change aer_print_error() to use dev_print_bits() instead of
__aer_print_error()

> Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
> ---
> drivers/pci/pcie/aer/aerdrv_errprint.c | 71 ++++++++++++++++++++++------------
> 1 file changed, 47 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c
> index 6a352e6..bb68dd4 100644
> --- a/drivers/pci/pcie/aer/aerdrv_errprint.c
> +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c
> @@ -72,22 +72,22 @@
> };
>
> static const char *aer_correctable_error_string[] = {
> - "Receiver Error", /* Bit Position 0 */
> + "RxErr", /* Bit Position 0 */
> NULL,
> NULL,
> NULL,
> NULL,
> NULL,
> - "Bad TLP", /* Bit Position 6 */
> - "Bad DLLP", /* Bit Position 7 */
> - "RELAY_NUM Rollover", /* Bit Position 8 */
> + "BadTLP", /* Bit Position 6 */
> + "BadDLLP", /* Bit Position 7 */
> + "Rollover", /* Bit Position 8 */
> NULL,
> NULL,
> NULL,
> - "Replay Timer Timeout", /* Bit Position 12 */
> - "Advisory Non-Fatal", /* Bit Position 13 */
> - "Corrected Internal Error", /* Bit Position 14 */
> - "Header Log Overflow", /* Bit Position 15 */
> + "Timeout", /* Bit Position 12 */
> + "NonFatalErr", /* Bit Position 13 */
> + "CorrIntErr", /* Bit Position 14 */
> + "HeaderOF", /* Bit Position 15 */
> };
>
> static const char *aer_uncorrectable_error_string[] = {
> @@ -95,28 +95,28 @@
> NULL,
> NULL,
> NULL,
> - "Data Link Protocol", /* Bit Position 4 */
> - "Surprise Down Error", /* Bit Position 5 */
> + "DLP", /* Bit Position 4 */
> + "SDES", /* Bit Position 5 */
> NULL,
> NULL,
> NULL,
> NULL,
> NULL,
> NULL,
> - "Poisoned TLP", /* Bit Position 12 */
> - "Flow Control Protocol", /* Bit Position 13 */
> - "Completion Timeout", /* Bit Position 14 */
> - "Completer Abort", /* Bit Position 15 */
> - "Unexpected Completion", /* Bit Position 16 */
> - "Receiver Overflow", /* Bit Position 17 */
> - "Malformed TLP", /* Bit Position 18 */
> + "TLP", /* Bit Position 12 */
> + "FCP", /* Bit Position 13 */
> + "CmpltTO", /* Bit Position 14 */
> + "CmpltAbrt", /* Bit Position 15 */
> + "UnxCmplt", /* Bit Position 16 */
> + "RxOF", /* Bit Position 17 */
> + "MalfTLP", /* Bit Position 18 */
> "ECRC", /* Bit Position 19 */
> - "Unsupported Request", /* Bit Position 20 */
> - "ACS Violation", /* Bit Position 21 */
> - "Uncorrectable Internal Error", /* Bit Position 22 */
> - "MC Blocked TLP", /* Bit Position 23 */
> - "AtomicOp Egress Blocked", /* Bit Position 24 */
> - "TLP Prefix Blocked Error", /* Bit Position 25 */
> + "UnsupReq", /* Bit Position 20 */
> + "ACSViol", /* Bit Position 21 */
> + "UncorrIntErr", /* Bit Position 22 */
> + "BlockedTLP", /* Bit Position 23 */
> + "AtomicOpBlocked", /* Bit Position 24 */
> + "TLPBlockedErr", /* Bit Position 25 */
> };
>
> static const char *aer_agent_string[] = {
> @@ -203,6 +203,29 @@ void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info)
> }
>
> #ifdef CONFIG_ACPI_APEI_PCIEAER
> +
> +#define MAX_PRINT_LENGTH 120
> +
> +void dev_print_bits(struct pci_dev *dev, unsigned int bits,
> + const char * const strs[], unsigned int strs_size)
> +{
> + unsigned int i;
> + char errs[MAX_PRINT_LENGTH];
> +
> + errs[0] = '\0';
> +
> + for (i = 0; i < strs_size; i++) {
> + if (!(bits & (1U << i)))
> + continue;
> + if (strs[i]) {
> + if (strlen(errs))
> + strlcat(errs, ", ", MAX_PRINT_LENGTH);
> + strlcat(errs, strs[i], MAX_PRINT_LENGTH);
> + }
> + }
> + dev_err(&dev->dev, "%s\n", errs);
> +}
> +
> int cper_severity_to_aer(int cper_severity)
> {
> switch (cper_severity) {
> @@ -240,7 +263,7 @@ void cper_print_aer(struct pci_dev *dev, int aer_severity,
> agent = AER_GET_AGENT(aer_severity, status);
>
> pci_err(dev, "aer_status: 0x%08x, aer_mask: 0x%08x\n", status, mask);
> - cper_print_bits("", status, status_strs, status_strs_size);
> + dev_print_bits(dev, status, status_strs, status_strs_size);
> pci_err(dev, "aer_layer=%s, aer_agent=%s\n",
> aer_error_layer[layer], aer_agent_string[agent]);
>
> --
> Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
> Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project.
>

\
 
 \ /
  Last update: 2018-02-27 22:45    [W:0.076 / U:1.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site