lkml.org 
[lkml]   [2018]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/4] i2c: xlp9xx: Check for Bus state after every transfer
From
Date
Hi Wolfram,


On 02/27/2018 10:30 AM, George Cherian wrote:
> Hi Wolfram,
>
> Thanks for the review.
>
> On 02/27/2018 01:52 AM, Wolfram Sang wrote:
>>
>> On Thu, Jan 18, 2018 at 05:39:24AM +0000, George Cherian wrote:
>>> I2C bus enters the STOP condition after the DATA_DONE interrupt is
>>> raised.
>>> Essentially the driver should be checking the bus state before sending
>>> the next transaction.
>>
>> Yes.
>>
>>> In case the next transaction is initiated while the
>>> bus is busy, the prior transactions stop condition is not achieved.
>>
>> I didn't fully get why you can't check the BUSY bit and wait a little
>> just before you push out the next message?
> Yes, I am checking for the BUSY bit and looping.
> Here for reference
>
> +    while (last_msg && busy_timeout) {
> +        status = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_STATUS);
> +        if ((status & XLP9XX_I2C_STATUS_BUSY) == 0)
> +            break;
> +
> +        busy_timeout--;
> +        udelay(1);
> +    }
> +
> +    if (!busy_timeout) {
> +        dev_dbg(priv->dev, "i2c bus busy for too long after transfer\n");
> +        return -EIO;
> +    }
>
> Did you mean to eliminate the udelay and use msleep?
> In any case I will re-post another version of the patch, since
> I have found some more issues and need to be fixed.

Since you raised concern on the patch I thought of reworking this patch.
But I can see that this patch is already applied for i2c/for-next.
Kindly let me know whether I should be sending follow-up patches on top
of i2c/for-next ?
>
>>
>>> Add the check to make sure the bus is not busy before next transaction.
>>>
>
> Regards,
> -George

Regards,
-George

\
 
 \ /
  Last update: 2018-02-27 06:11    [W:0.081 / U:10.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site