lkml.org 
[lkml]   [2018]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 0/2] add support for Socionext SynQuacer I2C controller
On 27 February 2018 at 15:59, Andy Shevchenko <andy.shevchenko@gmail.com> wrote:
> On Tue, Feb 27, 2018 at 1:01 PM, Ard Biesheuvel
> <ard.biesheuvel@linaro.org> wrote:
>> Add a binding and a driver for the I2C IP found in the Socionext SynQuacer
>> SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller.
>>
>
> Thanks for an update!
> FWIW,
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
>

Thanks Andy


>> v3:
>> - incorporate more of Andy's review comments (#2), especially regarding the
>> bus speed and clock source handling for ACPI
>> - patch #1 unchanged.
>>
>> v2:
>> - incorporate Andy's review comments (#2)
>> - patch #1 unchanged.
>>
>> Ard Biesheuvel (2):
>> dt-bindings: i2c: add binding for Socionext SynQuacer I2C
>> i2c: add support for Socionext SynQuacer I2C controller
>>
>> Documentation/devicetree/bindings/i2c/i2c-synquacer.txt | 29 +
>> drivers/i2c/busses/Kconfig | 10 +
>> drivers/i2c/busses/Makefile | 1 +
>> drivers/i2c/busses/i2c-synquacer.c | 787 ++++++++++++++++++++
>> 4 files changed, 827 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
>> create mode 100644 drivers/i2c/busses/i2c-synquacer.c
>>
>> --
>> 2.11.0
>>
>
>
>
> --
> With Best Regards,
> Andy Shevchenko

\
 
 \ /
  Last update: 2018-02-27 18:02    [W:0.189 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site