lkml.org 
[lkml]   [2018]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/8] arm64: dts: renesas: salvator-common: Override EtherAVB phy-mode
Date
As the PHY interface installed on the Salvator-X[S] board, provides TX
channel delay, make the "phy-mode" property a board-specific one, meant
to override the one specified in the SoC DTSI.

Follow up patches will reset the SoC DTSI to use "rgmii" mode and let
the board file override that.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 8e8ec30..c725f9b 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -279,6 +279,7 @@
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
+ phy-mode = "rgmii-txid";
status = "okay";

phy0: ethernet-phy@0 {
--
2.7.4
\
 
 \ /
  Last update: 2018-02-26 19:01    [W:0.120 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site