lkml.org 
[lkml]   [2018]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v11 2/7] PCI/AER: factor out error reporting from AER
On Fri, Feb 23, 2018 at 01:53:59PM +0530, Oza Pawandeep wrote:
> This patch factors out error reporting callbacks, which are currently
> tightly coupled with AER.

Add blank line between paragraphs.

> DPC should be able to register callbacks and attmept recovery when DPC
> trigger event occurs.

s/attmept/attempt/

This patch basically moves code from aerdrv_core.c to pcie-err.c. Make it
do *only* that.

> Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
>
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index fcd8191..abc514e 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -342,6 +342,9 @@ static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,
>
> void pci_enable_acs(struct pci_dev *dev);
>
> +/* PCI error reporting and recovery */
> +void pcie_do_recovery(struct pci_dev *dev, int severity);

Add this declaration in the first patch, the one where you rename the
function.

> #ifdef CONFIG_PCIEASPM
> void pcie_aspm_init_link_state(struct pci_dev *pdev);
> void pcie_aspm_exit_link_state(struct pci_dev *pdev);
> diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
> index 223e4c3..d669497 100644
> --- a/drivers/pci/pcie/Makefile
> +++ b/drivers/pci/pcie/Makefile
> @@ -6,7 +6,7 @@
> # Build PCI Express ASPM if needed
> obj-$(CONFIG_PCIEASPM) += aspm.o
>
> -pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o
> +pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o pcie-err.o

Can we name this just "drivers/pci/pcie/err.c"? I know we have
pcie-dpc.c already, but it does get a little repetitious to type
"pci" THREE times in that path.

> pcieportdrv-$(CONFIG_ACPI) += portdrv_acpi.o
>
> obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
> diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
> index 5449e5c..bc9db53 100644
> --- a/drivers/pci/pcie/aer/aerdrv.h
> +++ b/drivers/pci/pcie/aer/aerdrv.h
> @@ -76,36 +76,6 @@ struct aer_rpc {
> */
> };
>
> -struct aer_broadcast_data {
> - enum pci_channel_state state;
> - enum pci_ers_result result;
> -};
> -
> -static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
> - enum pci_ers_result new)
> -{
> - if (new == PCI_ERS_RESULT_NO_AER_DRIVER)
> - return PCI_ERS_RESULT_NO_AER_DRIVER;
> -
> - if (new == PCI_ERS_RESULT_NONE)
> - return orig;
> -
> - switch (orig) {
> - case PCI_ERS_RESULT_CAN_RECOVER:
> - case PCI_ERS_RESULT_RECOVERED:
> - orig = new;
> - break;
> - case PCI_ERS_RESULT_DISCONNECT:
> - if (new == PCI_ERS_RESULT_NEED_RESET)
> - orig = PCI_ERS_RESULT_NEED_RESET;
> - break;
> - default:
> - break;
> - }
> -
> - return orig;
> -}
> -
> extern struct bus_type pcie_port_bus_type;
> void aer_isr(struct work_struct *work);
> void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
> diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
> index aeb83a0..f60b1bb 100644
> --- a/drivers/pci/pcie/aer/aerdrv_core.c
> +++ b/drivers/pci/pcie/aer/aerdrv_core.c
> @@ -23,6 +23,7 @@
> #include <linux/slab.h>
> #include <linux/kfifo.h>
> #include "aerdrv.h"
> +#include "../../pci.h"
>
> #define PCI_EXP_AER_FLAGS (PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | \
> PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE)
> @@ -230,191 +231,6 @@ static bool find_source_device(struct pci_dev *parent,
> return true;
> }
>
> -static int report_error_detected(struct pci_dev *dev, void *data)
> -{
> - pci_ers_result_t vote;
> - const struct pci_error_handlers *err_handler;
> - struct aer_broadcast_data *result_data;
> - result_data = (struct aer_broadcast_data *) data;
> -
> - device_lock(&dev->dev);
> - dev->error_state = result_data->state;
> -
> - if (!dev->driver ||
> - !dev->driver->err_handler ||
> - !dev->driver->err_handler->error_detected) {
> - if (result_data->state == pci_channel_io_frozen &&
> - dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
> - /*
> - * In case of fatal recovery, if one of down-
> - * stream device has no driver. We might be
> - * unable to recover because a later insmod
> - * of a driver for this device is unaware of
> - * its hw state.
> - */
> - pci_printk(KERN_DEBUG, dev, "device has %s\n",
> - dev->driver ?
> - "no AER-aware driver" : "no driver");
> - }
> -
> - /*
> - * If there's any device in the subtree that does not
> - * have an error_detected callback, returning
> - * PCI_ERS_RESULT_NO_AER_DRIVER prevents calling of
> - * the subsequent mmio_enabled/slot_reset/resume
> - * callbacks of "any" device in the subtree. All the
> - * devices in the subtree are left in the error state
> - * without recovery.
> - */
> -
> - if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
> - vote = PCI_ERS_RESULT_NO_AER_DRIVER;
> - else
> - vote = PCI_ERS_RESULT_NONE;
> - } else {
> - err_handler = dev->driver->err_handler;
> - vote = err_handler->error_detected(dev, result_data->state);
> - pci_uevent_ers(dev, PCI_ERS_RESULT_NONE);
> - }
> -
> - result_data->result = merge_result(result_data->result, vote);
> - device_unlock(&dev->dev);
> - return 0;
> -}
> -
> -static int report_mmio_enabled(struct pci_dev *dev, void *data)
> -{
> - pci_ers_result_t vote;
> - const struct pci_error_handlers *err_handler;
> - struct aer_broadcast_data *result_data;
> - result_data = (struct aer_broadcast_data *) data;
> -
> - device_lock(&dev->dev);
> - if (!dev->driver ||
> - !dev->driver->err_handler ||
> - !dev->driver->err_handler->mmio_enabled)
> - goto out;
> -
> - err_handler = dev->driver->err_handler;
> - vote = err_handler->mmio_enabled(dev);
> - result_data->result = merge_result(result_data->result, vote);
> -out:
> - device_unlock(&dev->dev);
> - return 0;
> -}
> -
> -static int report_slot_reset(struct pci_dev *dev, void *data)
> -{
> - pci_ers_result_t vote;
> - const struct pci_error_handlers *err_handler;
> - struct aer_broadcast_data *result_data;
> - result_data = (struct aer_broadcast_data *) data;
> -
> - device_lock(&dev->dev);
> - if (!dev->driver ||
> - !dev->driver->err_handler ||
> - !dev->driver->err_handler->slot_reset)
> - goto out;
> -
> - err_handler = dev->driver->err_handler;
> - vote = err_handler->slot_reset(dev);
> - result_data->result = merge_result(result_data->result, vote);
> -out:
> - device_unlock(&dev->dev);
> - return 0;
> -}
> -
> -static int report_resume(struct pci_dev *dev, void *data)
> -{
> - const struct pci_error_handlers *err_handler;
> -
> - device_lock(&dev->dev);
> - dev->error_state = pci_channel_io_normal;
> -
> - if (!dev->driver ||
> - !dev->driver->err_handler ||
> - !dev->driver->err_handler->resume)
> - goto out;
> -
> - err_handler = dev->driver->err_handler;
> - err_handler->resume(dev);
> - pci_uevent_ers(dev, PCI_ERS_RESULT_RECOVERED);
> -out:
> - device_unlock(&dev->dev);
> - return 0;
> -}
> -
> -/**
> - * broadcast_error_message - handle message broadcast to downstream drivers
> - * @dev: pointer to from where in a hierarchy message is broadcasted down
> - * @state: error state
> - * @error_mesg: message to print
> - * @cb: callback to be broadcasted
> - *
> - * Invoked during error recovery process. Once being invoked, the content
> - * of error severity will be broadcasted to all downstream drivers in a
> - * hierarchy in question.
> - */
> -static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
> - enum pci_channel_state state,
> - char *error_mesg,
> - int (*cb)(struct pci_dev *, void *))
> -{
> - struct aer_broadcast_data result_data;
> -
> - pci_printk(KERN_DEBUG, dev, "broadcast %s message\n", error_mesg);
> - result_data.state = state;
> - if (cb == report_error_detected)
> - result_data.result = PCI_ERS_RESULT_CAN_RECOVER;
> - else
> - result_data.result = PCI_ERS_RESULT_RECOVERED;
> -
> - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> - /*
> - * If the error is reported by a bridge, we think this error
> - * is related to the downstream link of the bridge, so we
> - * do error recovery on all subordinates of the bridge instead
> - * of the bridge and clear the error status of the bridge.
> - */
> - if (cb == report_error_detected)
> - dev->error_state = state;
> - pci_walk_bus(dev->subordinate, cb, &result_data);
> - if (cb == report_resume) {
> - pci_cleanup_aer_uncorrect_error_status(dev);
> - dev->error_state = pci_channel_io_normal;
> - }
> - } else {
> - /*
> - * If the error is reported by an end point, we think this
> - * error is related to the upstream link of the end point.
> - */
> - if (state == pci_channel_io_normal)
> - /*
> - * the error is non fatal so the bus is ok, just invoke
> - * the callback for the function that logged the error.
> - */
> - cb(dev, &result_data);
> - else
> - pci_walk_bus(dev->bus, cb, &result_data);
> - }
> -
> - return result_data.result;
> -}
> -
> -/**
> - * default_reset_link - default reset function
> - * @dev: pointer to pci_dev data structure
> - *
> - * Invoked when performing link reset on a Downstream Port or a
> - * Root Port with no aer driver.
> - */
> -static pci_ers_result_t default_reset_link(struct pci_dev *dev)
> -{
> - pci_reset_bridge_secondary_bus(dev);
> - pci_printk(KERN_DEBUG, dev, "downstream link has been reset\n");
> - return PCI_ERS_RESULT_RECOVERED;
> -}
> -
> static int find_aer_service_iter(struct device *device, void *data)
> {
> struct pcie_port_service_driver *service_driver, **drv;
> @@ -432,7 +248,7 @@ static int find_aer_service_iter(struct device *device, void *data)
> return 0;
> }
>
> -static struct pcie_port_service_driver *find_aer_service(struct pci_dev *dev)
> +struct pcie_port_service_driver *pci_find_aer_service(struct pci_dev *dev)

Move this rename to a different patch. The new name should probably
start with "pcie" like you did with pcie_do_recovery().

> {
> struct pcie_port_service_driver *drv = NULL;
>
> @@ -440,107 +256,7 @@ static struct pcie_port_service_driver *find_aer_service(struct pci_dev *dev)
>
> return drv;
> }
> -
> -static pci_ers_result_t reset_link(struct pci_dev *dev)
> -{
> - struct pci_dev *udev;
> - pci_ers_result_t status;
> - struct pcie_port_service_driver *driver;
> -
> - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> - /* Reset this port for all subordinates */
> - udev = dev;
> - } else {
> - /* Reset the upstream component (likely downstream port) */
> - udev = dev->bus->self;
> - }
> -
> - /* Use the aer driver of the component firstly */
> - driver = find_aer_service(udev);
> -
> - if (driver && driver->reset_link) {
> - status = driver->reset_link(udev);
> - } else if (udev->has_secondary_link) {
> - status = default_reset_link(udev);
> - } else {
> - pci_printk(KERN_DEBUG, dev, "no link-reset support at upstream device %s\n",
> - pci_name(udev));
> - return PCI_ERS_RESULT_DISCONNECT;
> - }
> -
> - if (status != PCI_ERS_RESULT_RECOVERED) {
> - pci_printk(KERN_DEBUG, dev, "link reset at upstream device %s failed\n",
> - pci_name(udev));
> - return PCI_ERS_RESULT_DISCONNECT;
> - }
> -
> - return status;
> -}
> -
> -/**
> - * pcie_do_recovery - handle nonfatal/fatal error recovery process
> - * @dev: pointer to a pci_dev data structure of agent detecting an error
> - * @severity: error severity type
> - *
> - * Invoked when an error is nonfatal/fatal. Once being invoked, broadcast
> - * error detected message to all downstream drivers within a hierarchy in
> - * question and return the returned code.
> - */
> -static void pcie_do_recovery(struct pci_dev *dev, int severity)
> -{
> - pci_ers_result_t status, result = PCI_ERS_RESULT_RECOVERED;
> - enum pci_channel_state state;
> -
> - if (severity == AER_FATAL)
> - state = pci_channel_io_frozen;
> - else
> - state = pci_channel_io_normal;
> -
> - status = broadcast_error_message(dev,
> - state,
> - "error_detected",
> - report_error_detected);
> -
> - if (severity == AER_FATAL) {
> - result = reset_link(dev);
> - if (result != PCI_ERS_RESULT_RECOVERED)
> - goto failed;
> - }
> -
> - if (status == PCI_ERS_RESULT_CAN_RECOVER)
> - status = broadcast_error_message(dev,
> - state,
> - "mmio_enabled",
> - report_mmio_enabled);
> -
> - if (status == PCI_ERS_RESULT_NEED_RESET) {
> - /*
> - * TODO: Should call platform-specific
> - * functions to reset slot before calling
> - * drivers' slot_reset callbacks?
> - */
> - status = broadcast_error_message(dev,
> - state,
> - "slot_reset",
> - report_slot_reset);
> - }
> -
> - if (status != PCI_ERS_RESULT_RECOVERED)
> - goto failed;
> -
> - broadcast_error_message(dev,
> - state,
> - "resume",
> - report_resume);
> -
> - pci_info(dev, "AER: Device recovery successful\n");
> - return;
> -
> -failed:
> - pci_uevent_ers(dev, PCI_ERS_RESULT_DISCONNECT);
> - /* TODO: Should kernel panic here? */
> - pci_info(dev, "AER: Device recovery failed\n");
> -}
> +EXPORT_SYMBOL_GPL(pci_find_aer_service);

This is never called from a module, so I don't think you need to
export it at all. If you do, it should be a separate patch, not
buried in the middle of this big one.

> /**
> * handle_error_source - handle logging error into an event log
> diff --git a/drivers/pci/pcie/pcie-err.c b/drivers/pci/pcie/pcie-err.c
> new file mode 100644
> index 0000000..fcd5add
> --- /dev/null
> +++ b/drivers/pci/pcie/pcie-err.c
> @@ -0,0 +1,334 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * This file implements the error recovery as a core part of PCIe error reporting.
> + * When a PCIe error is delivered, an error message will be collected and printed
> + * to console, then, an error recovery procedure will be executed by following
> + * the PCI error recovery rules.

Wrap this so it fits in 80 columns.

> + * Copyright (C) 2006 Intel Corp.
> + * Tom Long Nguyen (tom.l.nguyen@intel.com)
> + * Zhang Yanmin (yanmin.zhang@intel.com)
> + *
> + */
> +
> +#include <linux/pci.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/aer.h>
> +#include <linux/pcieport_if.h>
> +#include "portdrv.h"
> +
> +struct aer_broadcast_data {
> + enum pci_channel_state state;
> + enum pci_ers_result result;
> +};
> +
> +static pci_ers_result_t merge_result(enum pci_ers_result orig,
> + enum pci_ers_result new)
> +{
> + if (new == PCI_ERS_RESULT_NO_AER_DRIVER)
> + return PCI_ERS_RESULT_NO_AER_DRIVER;
> +
> + if (new == PCI_ERS_RESULT_NONE)
> + return orig;
> +
> + switch (orig) {
> + case PCI_ERS_RESULT_CAN_RECOVER:
> + case PCI_ERS_RESULT_RECOVERED:
> + orig = new;
> + break;
> + case PCI_ERS_RESULT_DISCONNECT:
> + if (new == PCI_ERS_RESULT_NEED_RESET)
> + orig = PCI_ERS_RESULT_NEED_RESET;
> + break;
> + default:
> + break;
> + }
> +
> + return orig;
> +}
> +
> +static int report_mmio_enabled(struct pci_dev *dev, void *data)
> +{
> + pci_ers_result_t vote;
> + const struct pci_error_handlers *err_handler;
> + struct aer_broadcast_data *result_data;
> +
> + result_data = (struct aer_broadcast_data *) data;
> +
> + device_lock(&dev->dev);
> + if (!dev->driver ||
> + !dev->driver->err_handler ||
> + !dev->driver->err_handler->mmio_enabled)
> + goto out;
> +
> + err_handler = dev->driver->err_handler;
> + vote = err_handler->mmio_enabled(dev);
> + result_data->result = merge_result(result_data->result, vote);
> +out:
> + device_unlock(&dev->dev);
> + return 0;
> +}
> +
> +static int report_slot_reset(struct pci_dev *dev, void *data)
> +{
> + pci_ers_result_t vote;
> + const struct pci_error_handlers *err_handler;
> + struct aer_broadcast_data *result_data;
> +
> + result_data = (struct aer_broadcast_data *) data;
> +
> + device_lock(&dev->dev);
> + if (!dev->driver ||
> + !dev->driver->err_handler ||
> + !dev->driver->err_handler->slot_reset)
> + goto out;
> +
> + err_handler = dev->driver->err_handler;
> + vote = err_handler->slot_reset(dev);
> + result_data->result = merge_result(result_data->result, vote);
> +out:
> + device_unlock(&dev->dev);
> + return 0;
> +}
> +
> +static int report_resume(struct pci_dev *dev, void *data)
> +{
> + const struct pci_error_handlers *err_handler;
> +
> + device_lock(&dev->dev);
> + dev->error_state = pci_channel_io_normal;
> +
> + if (!dev->driver ||
> + !dev->driver->err_handler ||
> + !dev->driver->err_handler->resume)
> + goto out;
> +
> + err_handler = dev->driver->err_handler;
> + err_handler->resume(dev);
> +out:
> + device_unlock(&dev->dev);
> + return 0;
> +}
> +
> +static int report_error_detected(struct pci_dev *dev, void *data)
> +{
> + pci_ers_result_t vote;
> + const struct pci_error_handlers *err_handler;
> + struct aer_broadcast_data *result_data;
> +
> + result_data = (struct aer_broadcast_data *) data;
> +
> + device_lock(&dev->dev);
> + dev->error_state = result_data->state;
> +
> + if (!dev->driver ||
> + !dev->driver->err_handler ||
> + !dev->driver->err_handler->error_detected) {
> + if (result_data->state == pci_channel_io_frozen &&
> + dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
> + /*
> + * In case of fatal recovery, if one of down-
> + * stream device has no driver. We might be
> + * unable to recover because a later insmod
> + * of a driver for this device is unaware of
> + * its hw state.
> + */
> + dev_printk(KERN_DEBUG, &dev->dev, "device has %s\n",
> + dev->driver ?
> + "no error-aware driver" : "no driver");

This was a pci_printk() before you moved it and it should be the same here.

> + }
> +
> + /*
> + * If there's any device in the subtree that does not
> + * have an error_detected callback, returning
> + * PCI_ERS_RESULT_NO_AER_DRIVER prevents calling of
> + * the subsequent mmio_enabled/slot_reset/resume
> + * callbacks of "any" device in the subtree. All the
> + * devices in the subtree are left in the error state
> + * without recovery.
> + */
> +
> + if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
> + vote = PCI_ERS_RESULT_NO_AER_DRIVER;
> + else
> + vote = PCI_ERS_RESULT_NONE;
> + } else {
> + err_handler = dev->driver->err_handler;
> + vote = err_handler->error_detected(dev, result_data->state);
> + }
> +
> + result_data->result = merge_result(result_data->result, vote);
> + device_unlock(&dev->dev);
> + return 0;
> +}
> +
> +/**
> + * default_reset_link - default reset function
> + * @dev: pointer to pci_dev data structure
> + *
> + * Invoked when performing link reset on a Downstream Port or a
> + * Root Port with no aer driver.
> + */
> +static pci_ers_result_t default_reset_link(struct pci_dev *dev)
> +{
> + pci_reset_bridge_secondary_bus(dev);
> + dev_printk(KERN_DEBUG, &dev->dev, "downstream link has been reset\n");

This should be a pci_printk() as it was before the move. There are more
below.

> + return PCI_ERS_RESULT_RECOVERED;
> +}
> +
> +static pci_ers_result_t reset_link(struct pci_dev *dev)
> +{
> + struct pci_dev *udev;
> + pci_ers_result_t status;
> + struct pcie_port_service_driver *driver = NULL;
> +
> + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> + /* Reset this port for all subordinates */
> + udev = dev;
> + } else {
> + /* Reset the upstream component (likely downstream port) */
> + udev = dev->bus->self;
> + }
> +
> +#if IS_ENABLED(CONFIG_PCIEAER)

AER can't be a module, so you can use just:

#ifdef CONFIG_PCIEAER

This ifdef should be added in the patch where you add a caller from non-AER
code. This patch should only move code, not change it.

> + /* Use the aer driver of the component firstly */
> + driver = pci_find_aer_service(udev);
> +#endif
> +
> + if (driver && driver->reset_link) {
> + status = driver->reset_link(udev);
> + } else if (udev->has_secondary_link) {
> + status = default_reset_link(udev);
> + } else {
> + dev_printk(KERN_DEBUG, &dev->dev,
> + "no link-reset support at upstream device %s\n",
> + pci_name(udev));
> + return PCI_ERS_RESULT_DISCONNECT;
> + }
> +
> + if (status != PCI_ERS_RESULT_RECOVERED) {
> + dev_printk(KERN_DEBUG, &dev->dev,
> + "link reset at upstream device %s failed\n",
> + pci_name(udev));
> + return PCI_ERS_RESULT_DISCONNECT;
> + }
> +
> + return status;
> +}
> +
> +/**
> + * broadcast_error_message - handle message broadcast to downstream drivers
> + * @dev: pointer to where in a hierarchy message is broadcasted down
> + * @state: error state
> + * @error_mesg: message to print
> + * @cb: callback to be broadcast
> + *
> + * Invoked during error recovery process. Once being invoked, the content
> + * of error severity will be broadcast to all downstream drivers in a
> + * hierarchy in question.
> + */
> +static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
> + enum pci_channel_state state,
> + char *error_mesg,
> + int (*cb)(struct pci_dev *, void *))
> +{
> + struct aer_broadcast_data result_data;
> +
> + dev_printk(KERN_DEBUG, &dev->dev, "broadcast %s message\n", error_mesg);
> + result_data.state = state;
> + if (cb == report_error_detected)
> + result_data.result = PCI_ERS_RESULT_CAN_RECOVER;
> + else
> + result_data.result = PCI_ERS_RESULT_RECOVERED;
> +
> + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> + /*
> + * If the error is reported by a bridge, we think this error
> + * is related to the downstream link of the bridge, so we
> + * do error recovery on all subordinates of the bridge instead
> + * of the bridge and clear the error status of the bridge.
> + */
> + if (cb == report_error_detected)
> + dev->error_state = state;
> + pci_walk_bus(dev->subordinate, cb, &result_data);
> + if (cb == report_resume) {
> + pci_cleanup_aer_uncorrect_error_status(dev);
> + dev->error_state = pci_channel_io_normal;
> + }
> + } else {
> + /*
> + * If the error is reported by an end point, we think this
> + * error is related to the upstream link of the end point.
> + */
> + pci_walk_bus(dev->bus, cb, &result_data);
> + }
> +
> + return result_data.result;
> +}
> +
> +/**
> + * pcie_do_recovery - handle nonfatal/fatal error recovery process
> + * @dev: pointer to a pci_dev data structure of agent detecting an error
> + * @severity: error severity type
> + *
> + * Invoked when an error is nonfatal/fatal. Once being invoked, broadcast
> + * error detected message to all downstream drivers within a hierarchy in
> + * question and return the returned code.
> + */
> +void pcie_do_recovery(struct pci_dev *dev, int severity)
> +{
> + pci_ers_result_t status, result = PCI_ERS_RESULT_RECOVERED;
> + enum pci_channel_state state;
> +
> + if (severity == AER_FATAL)
> + state = pci_channel_io_frozen;
> + else
> + state = pci_channel_io_normal;
> +
> + status = broadcast_error_message(dev,
> + state,
> + "error_detected",
> + report_error_detected);
> +
> + if (severity == AER_FATAL) {
> + result = reset_link(dev);
> + if (result != PCI_ERS_RESULT_RECOVERED)
> + goto failed;
> + }
> +
> + if (status == PCI_ERS_RESULT_CAN_RECOVER)
> + status = broadcast_error_message(dev,
> + state,
> + "mmio_enabled",
> + report_mmio_enabled);
> +
> + if (status == PCI_ERS_RESULT_NEED_RESET) {
> + /*
> + * TODO: Should call platform-specific
> + * functions to reset slot before calling
> + * drivers' slot_reset callbacks?
> + */
> + status = broadcast_error_message(dev,
> + state,
> + "slot_reset",
> + report_slot_reset);
> + }
> +
> + if (status != PCI_ERS_RESULT_RECOVERED)
> + goto failed;
> +
> + broadcast_error_message(dev,
> + state,
> + "resume",
> + report_resume);
> +
> + dev_info(&dev->dev, "Device recovery successful\n");
> + return;
> +
> +failed:
> + /* TODO: Should kernel panic here? */
> + dev_info(&dev->dev, "Device recovery failed\n");
> +}
> diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
> index a854bc5..4f1992d 100644
> --- a/drivers/pci/pcie/portdrv.h
> +++ b/drivers/pci/pcie/portdrv.h
> @@ -79,4 +79,5 @@ static inline void pcie_port_platform_notify(struct pci_dev *port, int *mask)
> static inline void pcie_port_platform_notify(struct pci_dev *port, int *mask){}
> #endif /* !CONFIG_ACPI */
>
> +struct pcie_port_service_driver *pci_find_aer_service(struct pci_dev *dev);

Should be in a different patch, maybe the one where you rename it.

> #endif /* _PORTDRV_H_ */
> --
> Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.,
> a Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
>

\
 
 \ /
  Last update: 2018-02-24 00:43    [W:0.242 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site