[lkml]   [2018]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH,RESEND2] regulator: fixed, gpio: dt: regulator-name is required property
These two drivers fail to probe if no name is provided. For details see:

Signed-off-by: Harald Geyer <>
Acked-by: Rob Herring <>
This is already the second resend for this trivial device probing bug
fix. It was written to your specification, got an ACK from devicetree
and has no unaddressed review comments, so I can't see what might be
holding it back. If there is still anything wrong with it, I'd appreciate
actual feedback instead of a canned response or silence.

BTW, it took me a bit to figure out that by "content free ping" you are
refering to the quoting of the patch. Maybe you can reword your canned
response to make it easier to understand.

The ACK was added in the (first) resend.

Documentation/devicetree/bindings/regulator/fixed-regulator.txt | 1 +
Documentation/devicetree/bindings/regulator/gpio-regulator.txt | 2 ++
2 files changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 4fae41d..0c2a6c8 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -2,6 +2,7 @@ Fixed Voltage regulators

Required properties:
- compatible: Must be "regulator-fixed";
+- regulator-name: Defined in regulator.txt as optional, but required here.

Optional properties:
- gpio: gpio to use for enable control
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
index dd1ed78..1f49615 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
@@ -2,6 +2,8 @@ GPIO controlled regulators

Required properties:
- compatible : Must be "regulator-gpio".
+- regulator-name : Defined in regulator.txt as optional, but required
+ here.
- states : Selection of available voltages and GPIO configs.
if there are no states, then use a fixed regulator

 \ /
  Last update: 2018-02-13 15:53    [W:0.090 / U:0.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site