[lkml]   [2018]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] arm64: Make L1_CACHE_SHIFT configurable
On Mon, Feb 12, 2018 at 03:45:23PM -0800, Florian Fainelli wrote:
> On many platforms, including, but not limited to Brahma-B53 platforms,
> the L1 cache line size is 64bytes. Increasing the value to 128bytes
> appears to be creating performance problems for workloads involving
> network drivers and lots of data movement. In order to keep what was
> introduced with 97303480753e ("arm64: Increase the max granular size"),
> a kernel built for ARCH_THUNDER or ARCH_THUNDER2 will get a 128bytes
> cache line size definition.

This approach has been raised before ([1] as an example but you can
probably find other threads) and NAK'ed. I really don't want this macro
to be configurable as we aim for a single kernel Image.

My proposal was to move L1_CACHE_SHIFT back to 6 and ARCH_DMA_MIN_ALIGN
to 128 as this is the largest known CWG. The networking code is wrong in
assuming SKB_DATA_ALIGN only needs SMP_CACHE_BYTES for DMA alignment but
we can add some safety checks (i.e. WARN_ON) in the arch dma ops code if
the device is non-coherent.

I'll send a patch to the list (hopefully later today).



 \ /
  Last update: 2018-02-13 12:57    [W:0.073 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site