[lkml]   [2018]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 16/21] regulator: wm8994: Pass descriptor instead of GPIO number
On Mon, 12 Feb 2018, Linus Walleij wrote:

> Instead of passing a global GPIO number for the enable GPIO, pass
> a descriptor looked up from the device tree node or the board file
> decriptor table for the regulator.
> There is a single board file passing the GPIOs for LDO1 and LDO2
> through platform data, so augment this to pass descriptors
> associated with the i2c device as well.
> Cc:
> Cc: Charles Keepax <>
> Cc: Lee Jones <>
> Signed-off-by: Linus Walleij <>
> ---
> Lee: this patch is touching the MFD core driver for WM8994,
> but as with all other patches we just change the regulator
> parts. Would be nice if you could ACK it.

Fine, but any sign of a conflict and I'll need a PR.

Acked-by: Lee Jones <>

Lee Jones
Linaro Services Technical Lead │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

 \ /
  Last update: 2018-02-12 15:59    [W:0.755 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site